首页 | 本学科首页   官方微博 | 高级检索  
     

基于最小割集的系统可靠性预计
引用本文:郭海宽,赵新文,段孟强,晏峰.基于最小割集的系统可靠性预计[J].四川兵工学报,2014(3):148-152.
作者姓名:郭海宽  赵新文  段孟强  晏峰
作者单位:[1]海军工程大学动力工程学院,武汉430033 [2]海军驻431厂军事代表室,辽宁葫芦岛125005
摘    要:运用故障树分析法求解出设备冷却水系统的最小割集,由于此系统可靠性可以用其最小割集组合的可靠性来表示,假设系统的设备之间具有失效相关性,显然其最小割集内设备故障之间也具有失效相关的特性,针对设备之间存在失效相关性的情况,使用Copula函数刻画最小割集内设备故障之间的失效相关性,建立设备冷却水系统的可靠度预计模型并进行定量计算。分析结果表明,系统采用冗余设备的可靠度比无冗余情况的可靠度高,但设备之间的失效相关性使系统的可靠度降低了。也说明了该模型可以较好地解决设备冷却水系统的可靠性预计问题。

关 键 词:故障树分析法  Copula函数  可靠性预计  失效相关性  设备冷却水系统  单调关联系统  最小割集

Reliability Prediction Model Based on Minimal Cut Sets
Authors:GUO Hai-kuan ZHAO Xin-wen DUAN  Meng-qlang  YAN Feng
Affiliation:1. Power Engineering College, Naval University of Engineering, Wuhan 430033, China; 2. Naval Equipment Division Representative Office in 431 factory, Huludao 125005, China)
Abstract:This paper uses the FTA (fault tree analysis) to solve the minimal cut sets of CCWS, and relia bility of the system can be represented as a generalized mixture of the minimal cut sets reliability. Assum ing that there is correlation between the equipment in the system, clearly there is also the correlation be tween the equipment failures of minimal cut sets. According to this situation, this paper uses Copula to de scribe correlation between the equipment failures of minimal cut sets, establishes the reliability prediction model of CCWS and does the quantitative calculation. The results shows that the reliability of redundancy system is much higher than that of single equipment, but the dependent failures between equipment de crease the reliability of system. And also it shows that this model can be perfectly used in the reliability prediction of CCWS.
Keywords:fault tree analysis  Copula  reliability prediction  dependent failure  component cooling wa-ter system  coherent system  minimal cut sets
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号