首页 | 本学科首页   官方微博 | 高级检索  
     检索      

汽轮机末级转子叶片流固耦合计算
引用本文:弓三伟,任丽芸,刘火星,李琳,邹正平.汽轮机末级转子叶片流固耦合计算[J].热力透平,2007,36(3):153-157,163.
作者姓名:弓三伟  任丽芸  刘火星  李琳  邹正平
作者单位:1. 北京航空航天大学能源与动力工程学院,航空发动机气动热力重点实验室,北京,100083
2. 北京航空航天大学能源与动力工程学院,航空发动机气动热力重点实验室,北京,100083;航空发动机数值仿真研究中心,北京,100083
摘    要:对于大展弦比的叶片,流场与结构的相互作用不可忽略。本文利用商业软件CFX和ANSYS对某汽轮机末级转子叶片进行了设计和非设计状态下的流固耦合计算,对两种状态下耦合前后的流场结果进行了对比分析,叶片结构计算采用了双向与单向两种耦合方式。结果表明,非设计状态下流场对结构变形具有更强的敏感性;在稳态载荷作用下,两种耦合方式下的叶片位移、应力值差别不大。

关 键 词:流固耦合  汽轮机  数值模拟  动网格
文章编号:1672-5549(2007)03-0153-05
修稿时间:2007-04-23

Fluid-Solid Interaction of Rotor Blade in Last Stage of Steam Turbine
GONG San-wei,REN Li-yun,LIU Huo-xing,LI Lin,ZOU Zheng-ping.Fluid-Solid Interaction of Rotor Blade in Last Stage of Steam Turbine[J].Thermal Turbine,2007,36(3):153-157,163.
Authors:GONG San-wei  REN Li-yun  LIU Huo-xing  LI Lin  ZOU Zheng-ping
Abstract:The interaction between fluid field and structure should not be ignored for the blade with high aspect ratio.In this paper,fluid-solid interaction of rotor blade in the last stage of steam turbine is studied on design and off-design conditions by means of the commercial code CFX and ANSYS,and the flow field results with coupled and uncoupled methods are comparatively analyzed on the two conditions.Coupled and single code approaches are used in Numerical Simulation of blade structure application.The results indicate that,the flow field on off-design condition has intensive sensibility to the structure deformation,and the displacement and stress between coupled and single code approaches have little differences under the stable load.
Keywords:fluid-solid interaction  steam turbine  numerical simulation  moving mesh
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号