Solar-driven high temperature hydrogen production via integrated spectrally split concentrated photovoltaics (SSCPV) and solar power tower |
| |
| Affiliation: | 1. China-EU Institute for Clean & Renewable Energy, Huazhong University of Science and Technology, Shanghai Jiao Tong University, China;2. School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan, China;3. PROMES-CNRS Laboratory, 7 Rue Du Four Solaire, 66120 Font-Romeu-Odeillo, France;1. Department of Thermal Engineering and Energy, University Institute of Technology, University of Douala, PO Box 8698, Douala, Cameroon;2. Department of Civil Engineering, University Institute of Technology, PO Box 8698, Douala, Cameroon;3. Energy Laboratory, Doctoral Training Unit in Physics and Engineering Sciences, University of Douala, Cameroon;1. Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China;2. University of Chinese Academy of Sciences, Beijing 100049, China;3. School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, China;1. Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China;2. University of Chinese Academy of Sciences, Beijing 100049, China;3. School of Power and Mechanical Engineering, Wuhan University, Wuhan, Hubei 430072, China;4. Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230027, China;5. Key Laboratory of Efficient Utilization of Low and Medium Grade Energy, MOE, Tianjin University, Tianjin 300350, China;1. Deutsches Zentrum für Luft- und Raumfahrt, Institute of Engineering Thermodynamics, Pfaffenwaldring 38-40, 70569, Stuttgart, Germany;2. Deutsches Zentrum für Luft- und Raumfahrt, Solar Research, Linder Höhe, 51147, Köln, Germany;3. Deutsches Zentrum für Luft- und Raumfahrt, Solar Research, Karl-Heinz-Beckurts-Str.13, 52428, Jülich, Germany |
| |
| Abstract: | Hydrogen production can be achieved via combined concentrated photovoltaic (CPV) and concentrated solar power (CSP) in which concentrated radiation is spectrally split and then converted in a photovoltaic receiver and a thermal absorber. This study thus proposes an innovative solar process design integrating both thermal and quantum components of solar energy while providing a complete assessment of its global performance to demonstrate its practical interest. A stand-alone solar-to-hydrogen path was modeled and numerically simulated, which was both electrically and thermally supplied by a solar power generation unit to feed the electrolyzer power utilization unit with enhanced solar-to-hydrogen conversion efficiency. Following balance of plant (BoP), the heliostat field and cavity receiver were designed to match the entire system in which the receiver only intercepts a definite range of infrared wavelength while the rest is converted by separately insulated PV cells. Moreover, dichroic reflectors and optimum cutoff wavelength were applied to fulfill separate optimization and heat load reduction of each solar cell. Finally, the solid oxide electrolysis cell (SOEC) was designed to utilize the generated thermal and electrical power appropriately. In best case scenario, a solar-to-hydrogen conversion efficiency of 36.5% was achieved under 899 W/m2 direct normal irradiance (DNI) and 1000 suns concentration. The solar plant outputs at this operating point were 850 g/h H2 and 6754 g/h O2. Further improvement in efficiency can be achieved through alignment in regard to the site location and annual insolation variation. |
| |
| Keywords: | Concentrated solar power Concentrated photovoltaic Dichroic reflector Compound parabolic concentrator High-temperature steam electrolysis Solid oxide electrolysis cell |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
