| 增压汽油发动机冷却系统Flowmaster模拟分析研究 |
| |
| 引用本文： | 刘峰.增压汽油发动机冷却系统Flowmaster模拟分析研究[J].小型内燃机与摩托车,2013(6):53-58. |
| |
| 作者姓名： | 刘峰 |
| |
| 作者单位： | 安援救援管理服务（北京）有限公司,北京100020 |
| |
| 摘 要： | 由于原机型冷却系统管路设计的结构较为复杂,需要对冷却系统管路布置进行重新设计,本文主要针对这种改进后的冷却系统管路设计结构进行计算分析.利用Flowmaster软件建立了发动机冷却系统1D的模拟仿真模型.着重分析计算两种方案的流量、压力分布和流经元件的温度升高等情况.通过分析对比,确定方案1冷却液流量分布更均衡,能满足各元件的冷却需求,采用方案1作为冷却系统的结构改进方案.
|
| 关 键 词： | 冷却系统 增压汽油机 Flowmaster仿真 |
Simulation Analysis Research on the Coolant System of Turbo Gasoline Engine with Flowmaster |
| |
| Liu Feng.Simulation Analysis Research on the Coolant System of Turbo Gasoline Engine with Flowmaster[J].Small Internal Combustion Engine and Motorcycle,2013(6):53-58. |
| |
| Authors: | Liu Feng |
| |
| Affiliation: | Liu Feng(Allianz Assistance Management and Service(Beijing)Co., Ltd.,Beijing, 100020, China) |
| |
| Abstract: | For the reasons of the primary coolant system frame＇s complexities,it needs for the redesign of the coolant system frame distribution.This thesis is about the calculations and analysis of the improved coolant system＇s pipes＇frame.It established a one-dimension engine coolant simulated model with the software named Flowmaster,and emphasized to analyze and calculate the two schemes which are about the rate of flow,pressure distribution and conditions of the temperature additional of the units.Through the contrasts of the analysis results,it confirms the flow rate is more balanced in scheme 1,and it can easily satisfy the needs of each unit,can be adopted in the improved coolant system scheme. |
| |
| Keywords: | Coolant system Turbo gasoline engine Flowmaster simulation |
| 本文献已被 维普 等数据库收录！ |
