Pool boiling heat transfer of non-Newtonian nanofluids

This paper reports on the investigation of pool boiling heat transfer of γ-Al₂O₃/CMC non-Newtonian nanofluids. To prepare nanofluids, γ-Al₂O₃ nanoparticles were dispersed in CMC solution (carboxy methyl cellulose in water) using ultrasonic mixing and mechanical mixer. Different concentrations of CMC non-Newtonian fluids and γ-Al₂O₃/CMC non-Newtonian nanofluids were tested under nucleate pool boiling heat transfer conditions. Experiments were carried out at atmospheric pressure. Results show that the pool boiling heat transfer coefficient of CMC solutions is lower than water. The decrease in boiling heat transfer is more pronounced at higher CMC concentrations and, as a result, higher solution viscosity. Adding nanoparticles to CMC non-Newtonian solutions results in an improved boiling heat transfer performance. The enhancement in the boiling heat transfer coefficient increases with the nanoparticle concentration; at a concentration of 1.4 wt.%, the boiling heat transfer coefficient increases by about 25% when compared to the base fluid.