| ADN型高压单缸喷油泵出油阀升程传感器的研制 |
| |
| 引用本文： | 朱庆秋,毛炜琦,殷松森,华弢,陈光利,骆聪,董文武,王伟.ADN型高压单缸喷油泵出油阀升程传感器的研制[J].现代车用动力,2011(3):51-55. |
| |
| 作者姓名： | 朱庆秋 毛炜琦 殷松森 华弢 陈光利 骆聪 董文武 王伟 |
| |
| 作者单位： | 中国一汽无锡油泵油嘴研究所; |
| |
| 基金项目： | 国家高新技术研究发展专项经费资助——高压喷油泵关键技术与产品开发(2009AA045101) |
| |
| 摘 要： | 从ADN型高压单缸喷油泵的结构特点出发,提出出油阀升程的霍尔测量方案；同时对霍尔芯片的耐压能力进行了模拟验证试验,对传感器的封装结构进行了改进设计,确保了测量方案的可行.最后,对出油阀升程传感器进行了标定,并通过试验来分析了传感器安装对供油特性的影响情况.
|
| 关 键 词： | 出油阀升程 单缸喷油泵 高压 霍尔 |
Development of Delivery Valve Lift Sensor of ADN Single Plunger Unit Pump with High Injection Pressure |
| |
| ZHU Qing-qiu,MAO Wei-qi,YIN Song-sen,HUA Tao,CHEN Guang-li,LUO Cong,DONG Wen-wu,WANG Wei.Development of Delivery Valve Lift Sensor of ADN Single Plunger Unit Pump with High Injection Pressure[J].Modern Vehicle Power,2011(3):51-55. |
| |
| Authors: | ZHU Qing-qiu MAO Wei-qi YIN Song-sen HUA Tao CHEN Guang-li LUO Cong DONG Wen-wu WANG Wei |
| |
| Affiliation: | ZHU Qing-qiu,MAO Wei-qi,YIN Song-sen,HUA Tao,CHEN Guang-li,LUO Cong,DONG Wen-wu,WANG Wei(FAW Wuxi Fuel Injection Equipment Research Institute,Wuxi 214063,China) |
| |
| Abstract: | A Hall measurement was employed to measure the lift of delivery valve in ADN single plunger unit pump.After testing the pressure resistance of Hall chip,sensor package structure was improved to ensure the practicality of the measurement.After calibration of the lift sensor,fuel delivery characteristics experiment was performed to analyze the influence of sensor installation. |
| |
| Keywords: | delivery valve lift single plunger unit pump high injection pressure hall |
| 本文献已被 CNKI 等数据库收录！ |
|
