| 角钢预埋件受力性能和设计方法的试验研究 |
| |
| 引用本文： | 陈家坤,武贞和.角钢预埋件受力性能和设计方法的试验研究[J].建筑结构学报,1992,13(5):39-50. |
| |
| 作者姓名： | 陈家坤 武贞和 |
| |
| 作者单位： | 航空工业规划设计研究院
,航空工业规划设计研究院 |
| |
| 摘 要： | 本文通过290个试件的试验研究,基本上弄清了角钢预埋件的受力性能,提出了角钢预埋件的受力模式;推导出的半经验半理论计算公式,计算结果与试验结果符合较好。本文在大量试验数据分析验证的基础上,把角钢预埋件与钢筋预埋件计算公式统一起来,既简单实用,又不失其精确度,实际使用较为方便。
|
| 收稿时间： | 1992-10-05 |
| 修稿时间： | 1992-10-05 |
Research on Behaviour of Steel Angle Bearing Embedded Parts and Their Design Approach |
| |
| Chen Jiakun,Wu Zhenhe.Research on Behaviour of Steel Angle Bearing Embedded Parts and Their Design Approach[J].Journal of Building Structures,1992,13(5):39-50. |
| |
| Authors: | Chen Jiakun Wu Zhenhe |
| |
| Affiliation: | Chen Jiakun,Wu Zhenhe ( China Aeronautical Project and Design Institute ) |
| |
| Abstract: | Based on the research and test of 290 specimens, the behaviour of steel angle bearing embedded parts in concrete under different loads are described in this paper, the loadbearing modes of these embedded parts are presented with their semiempirical and semitheo-retical equations formulated. The equations are clear in conception and are in good agreement with the test results. A large amount of verification test findings and analysis made the calculation equations for both steel angle and steel bar bearing embedded parts unified. The unified equations are simple. accurate and convenient for use. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《建筑结构学报》浏览原始摘要信息 |
|
点击此处可从《建筑结构学报》下载全文 |
|
