| 考虑加劲及开孔的薄钢板稳定性 |
| |
| 引用本文： | 李春霞,宋波.考虑加劲及开孔的薄钢板稳定性[J].建筑科学与工程学报,2011,28(1):58-63. |
| |
| 作者姓名： | 李春霞 宋波 |
| |
| 作者单位： | 北京科技大学土木与环境工程学院,北京,100083 |
| |
| 基金项目： | "十一五"国家科技支撑计划项目 |
| |
| 摘 要： | 应用有限元软件ANSYS对烟道、选择性催化还原(SCR)反应器及支架进行整体结构静力分析,选取反应器上变形最大的侧壁板及有矩形大开孔的壁板作为研究对象,分别研究了加劲形式及开孔对薄钢板稳定性的影响。结果表明:对于单向受压的加劲板,现有的加劲肋设计方法满足稳定性的要求;在其他条件相同、板受单向均布压力时,加劲肋截面面积相同的条件下,配置L型加劲肋时板的稳定性比配置T型加劲肋的板更强;矩形大开孔改变了板的应力分布,在开孔的周边容易出现失稳现象,随着开孔的增大,板的临界屈曲特征值呈线性降低,但在开孔周边布置加劲肋能有效防止开孔周边板的失稳;相同截面面积的L型加劲肋对板的约束能力比T型加劲肋强;开孔会降低板的承载力,但开孔周边适当添加加劲肋能较大程度提高加劲板的临界屈曲特征值。
|
| 关 键 词： | 选择性催化还原反应器 结构稳定性 加劲板 矩形开孔板 临界屈曲特征值 |
Stability of Thin Steel Plate Considering Stiffening and Opening |
| |
| LI Chun-xia,SONG Bo.Stability of Thin Steel Plate Considering Stiffening and Opening[J].Journal of Architecture and Civil Engineering,2011,28(1):58-63. |
| |
| Authors: | LI Chun-xia SONG Bo |
| |
| Affiliation: | LI Chun-xia,SONG Bo (School of Civil & Environment Engineering,University of Science & Technology Beijing,Beijing 100083,China) |
| |
| Abstract: | The static analysis of the whole structure containing flue,selective catalytic reduction(SCR) reactor and bracket was carried out by using finite element software ANSYS.Selecting the top plate and the holed wall-plate as the object of study,the influence of the stability on thin steel plate considering stiffening and large rectangular opening was respectively studied.Results show that the present design of stiffening rib can meet the requirements of stability for stiffening plate with one-side pressure.Acco... |
| |
| Keywords: | SCR reactor stability of structure stiffening plate rectangular plate with hole critical buckling eigenvalue |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
