首页 | 本学科首页   官方微博 | 高级检索  
     

弦杆轴向压力作用下K型、KK型间隙方管节点静力工作性能的试验研究
引用本文:张壮南,武振宇,丁玉坤,张耀春.弦杆轴向压力作用下K型、KK型间隙方管节点静力工作性能的试验研究[J].土木工程学报,2005,38(4):32-37.
作者姓名:张壮南  武振宇  丁玉坤  张耀春
作者单位:哈尔滨工业大学土木工程学院
基金项目:国家自然科学基金资助项目 (50108006),哈尔滨工业大学校基金资助 (HIT 2001 48)
摘    要:对6个K型和7个KK型直接焊接方管节点进行了在弦杆轴向压力作用下的静力试验研究。通过对节点破坏模式和极限承载力的分析, 研究了支杆和弦杆宽度比、弦杆所受轴向压应力与弦杆屈服应力之比、支杆作用位置和空间作用对节点极限承载力的影响。采用ANSYS程序对试验节点进行了分析, 通过试验数据和有限元计算结果的比较, 证明采用ANSYS程序计算方管节点是可行的。

关 键 词:方管节点  静力性能  轴向压力  试验研究  有限元分析
文章编号:1000-131X(2005)04-0032-06
修稿时间:2003年6月9日

AN EXPERIMENTAL STUDY ON THE STATIC BEHAVIOR OF GAPPED SHS K-AND KK-JOINTS UNDER AXIAL LOAD
Zhang Zhuangnan,WU Zhenyu,Ding Yukun,Zhang Yaochun.AN EXPERIMENTAL STUDY ON THE STATIC BEHAVIOR OF GAPPED SHS K-AND KK-JOINTS UNDER AXIAL LOAD[J].China Civil Engineering Journal,2005,38(4):32-37.
Authors:Zhang Zhuangnan  WU Zhenyu  Ding Yukun  Zhang Yaochun
Affiliation:Harbin Institute of Technology
Abstract:Static tests on six K-joints and seven KK-joints fabricated from square hollow section (SHS) are conducted. Failure mode and limit bearing capacity of the joints are acquired,and effects of the ratios of brace to chord width,chord axial load to yield load, and the brace position and spatial action on joint strength are studied. The FE package program, ANSYS,is employed to calculate the strength of the joints.Comparison between the experiments and the calculations,indicates that ANSYS can be adopted to predict the static strength of SHS joints.
Keywords:RHS-joints  static behavior  axial load  experimental research  finite element analysis
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号