首页 | 本学科首页   官方微博 | 高级检索  
     

岩土工程极限分析有限元法及其应用
引用本文:郑颖人,赵尚毅.岩土工程极限分析有限元法及其应用[J].土木工程学报,2005,38(1):91-98.
作者姓名:郑颖人  赵尚毅
作者单位:后勤工程学院土木工程系
摘    要:经典岩土工程极限分析方法一般采用解析方法 ,有些还要对滑动面作假设 ,不适用于非均质材料 ,尤其是强度不均的岩石工程 ,从而使极限分析法的应用受到限制。随着计算机技术的发展 ,极限分析有限元法应运而生 ,它能通过强度降低或者荷载增加直接算得岩土工程的安全系数和滑动面 ,十分贴近工程设计。本文探讨了极限分析有限元法的一些基本原理 ,包括安全系数的定义、岩土体整体失稳的判据、屈服准则的选用等 ,并将该方法应用于边坡、地基、隧道稳定性计算 ,算例表明了此法的可行性 ,拓宽了该方法的应用范围

关 键 词:极限分析有限元法  有限元强度折减法:边坡稳定分析:地基极限承载力  隧道稳定性
文章编号:1000-131X(2005)01-0091-09
修稿时间:2004年11月2日

LIMIT STATE FINITE ELEMENT METHOD FOR GEOTECHNICAL ENGINEERING ANALYSIS AND ITS APPLICATIONS
ZHENG Yingren,Zhao Shangyi.LIMIT STATE FINITE ELEMENT METHOD FOR GEOTECHNICAL ENGINEERING ANALYSIS AND ITS APPLICATIONS[J].China Civil Engineering Journal,2005,38(1):91-98.
Authors:ZHENG Yingren  Zhao Shangyi
Abstract:Analytical method is adopted in classical geotechnical engineering limit analysis.It cannot involve the stress-strain behavior of soils,and sometimes assumptions need to be made in advance about the shape or location of the failure surface.It is not suitable for heterogeneous materials,thus its application still remains limited.With the development of computers and computing technology,the limit state finite element method has been put forward.With strength reduction or load increase,the stability safety factor and failure surface can be obtained directly at limit state.It is very practical for geotechnical engineering design.Fundamentals of the limit state finite element method are discussed in this paper,such as the definition of safety factor and the selection of yield criteria.Through a series of case studies(slope,foundation,tunnel),the applicability of the proposed method is demonstrated.
Keywords:limit state finite element method  slope stability analysis  ultimate bearing capacity of foundations  tunnel stability
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号