| 顶端伸出长度对高大模板支架稳定承载力的影响分析 |
| |
| 引用本文： | 闫鑫,胡长明,曾凡奎,梅源,董攀.顶端伸出长度对高大模板支架稳定承载力的影响分析[J].施工技术,2009,38(4). |
| |
| 作者姓名： | 闫鑫 胡长明 曾凡奎 梅源 董攀 |
| |
| 作者单位： | 西安建筑科技大学,陕西,西安,710055 |
| |
| 基金项目： | 陕西省教育厅专项基金，财政部国家重点施工新技术研发项目 |
| |
| 摘 要： | 对于高支模体系,不同顶端伸出长度(a值)和搭设步距对其整体稳定承载力有显著影响.利用有限元软件ANSYS建立理想高支模体系的计算模型,模拟分析不同顶端伸出长度和不同搭设步距下高支模体系的线性和非线性稳定承载力,对比分析得出a临界值为0.2m,并反算出其对应的计算长度系数.指出进行高支模设计时,施加2%竖向力作为水平力作用在架体刚度弱侧能够保证结构安全.
|
| 关 键 词： | 脚手架 高支模 钢框架 稳定承载力 顶端伸出长度 长度系数 |
Influence of Apical Extension Length on Stable Bearing Capacity of High Formwork Support |
| |
| Yan Xin,Hu Changming,Zeng Fankui,Mei Yuan,Dong Pan.Influence of Apical Extension Length on Stable Bearing Capacity of High Formwork Support[J].Construction Technology,2009,38(4). |
| |
| Authors: | Yan Xin Hu Changming Zeng Fankui Mei Yuan Dong Pan |
| |
| Affiliation: | Xi'an University of Architecture and Technology;Xi'an;Shaanxi 710055;China |
| |
| Abstract: | For high formwork support system,different apical extension length (a) and laying drawing pace have obvious influence on the whole stable bearing capacity. Based on this,ANSYS is used to simulate the linear and nonlinear stable bearing capacity of high formwork support system in different apical extension length and laying drawing pace. The a value and correlative length coefficient by back calculation are obtained in this paper. It is also pointed out that in high formwork support system design,2% vertical... |
| |
| Keywords: | scaffold high formwork support steel frame stable bearing capacity apical extension length length coefficient |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
