首页 | 本学科首页   官方微博 | 高级检索  
     

SAP对高强混凝土塑性阶段抗裂性能的影响
引用本文:于韵,王晓玭,邓芳明.SAP对高强混凝土塑性阶段抗裂性能的影响[J].混凝土,2021(3):27-30,34.
作者姓名:于韵  王晓玭  邓芳明
作者单位:南昌大学科学技术学院,江西南昌330029;华东交通大学,江西南昌330013
基金项目:国家自然科学基金(51767006);江西省教育厅科学技术重点项目(161512)。
摘    要:通过混凝土表面水分蒸发、毛细管负压试验,探讨高吸水性树脂(SAP)对低水胶比高强混凝土塑性阶段抗裂性能的影响。混凝土单位面积水分蒸发量越大,塑性阶段开裂数量、开裂面积越大;毛细管负压增长曲线越平缓,混凝土初始裂缝出现时间越迟;一定范围内SAP额外引水量比越大,混凝土单位面积水分蒸发量和水分蒸发速率越小,毛细管负压增长曲线越平缓,混凝土塑性阶段抗裂性能越好。

关 键 词:高吸水性树脂  低水胶比  塑性开裂  水分蒸发  毛细管负压

Effect of super-absorbent polymer on the plastic-shrinkage cracking of high-strength concrete
YU Yun,WANG Xiaopin,DENG Fangming.Effect of super-absorbent polymer on the plastic-shrinkage cracking of high-strength concrete[J].Concrete,2021(3):27-30,34.
Authors:YU Yun  WANG Xiaopin  DENG Fangming
Affiliation:(Nanchang University College of Science and Technology,Nanchang 330029,China;East China Jiaotong University,Nanchang 330013,China)
Abstract:The effect of super-absorbent polymer(SAP)on the plastic-shrinkage cracking of high-strength concrete with low water-binder ratio during plastic stage was studied through the experiments of evaporation of water on concrete surface and capillary pressure.The test results show that the number and area of cracks in the plastic stage are proportional to the water evaporated and evaporation rate,and the time of initial plastic-shrinkage cracks is proportional to the time of turning point of capillary pressure curve of concrete.The larger addition of SAP,the smaller the water evaporation and evaporation rate,the later the capillary pressure inflection point appears,and the better the crack resistance of concrete during plastic stage.
Keywords:super-absorbent polymer  low water-binder ratio  plastic-shrinkage cracking  evaporation of water  capillary pressure
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号