首页 | 本学科首页   官方微博 | 高级检索  
     

固体氧化性物质火灾危险性分级试验方法的研究
引用本文:李晋,王钢,孙金香,马玉和,孙士军,刘燕,高延萍.固体氧化性物质火灾危险性分级试验方法的研究[J].消防科学与技术,2005,24(4):419-420.
作者姓名:李晋  王钢  孙金香  马玉和  孙士军  刘燕  高延萍
作者单位:1. 公安部天津消防研究所,天津,300381
2. 天津市消防总队,天津,300090
基金项目:公安部科研计划项目(20018562401)
摘    要:介绍了一种关于固体氧化性物质火灾危险性定量分级的试验方法,并就试验过程中的一些影响因素加以讨论、研究。试验证明,该方法可操作性强,可定量分析固体氧化性物质的火灾危险性大小;鉴于各种因素对试验结果的影响,提出了试验的工况应一致的要求;根据试验时经常出现的引火源电热丝烧断的现象,提出了改进的建议。

关 键 词:固体氧化性物质  火灾危险性  分级  试验方法
文章编号:1009-0029(2005)04-0419-02
修稿时间:2005年2月21日

Study on the fire risk grading test method of solid oxidated material
LI Jin,WANG Gang,SUN Jin-xiang,MA Yu-he,SUN Shi-jun,LIU Yan,GAO Yan-ping.Study on the fire risk grading test method of solid oxidated material[J].Fire Science and Technology,2005,24(4):419-420.
Authors:LI Jin  WANG Gang  SUN Jin-xiang  MA Yu-he  SUN Shi-jun  LIU Yan  GAO Yan-ping
Affiliation:LI Jin~1,WANG Gang~1,SUN Jin-xiang~1,MA Yu-he~2,SUN Shi-jun~2,LIU Yan~1,GAO Yan-ping~1
Abstract:The fire risking grading test method of certain solid oxidated material was introduced. Some affecting factors during the test have been discussed and studied.The test proved that the test method was quite practicable,it can quantify the fire risk of the solid oxidated material.The result was affected by many factors,so the testing conditions were required to be the same.The electric fire ignition source was often burnt out, some suggestions on how to improve the condition were given.
Keywords:solid oxidated material  fire risk  geading  test method
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号