首页 | 本学科首页   官方微博 | 高级检索  
     

低压射流曝气氧化沟工艺处理制浆造纸中段废水
引用本文:张安龙,刘春,张建安.低压射流曝气氧化沟工艺处理制浆造纸中段废水[J].中国给水排水,2008,24(22).
作者姓名:张安龙  刘春  张建安
作者单位:1. 陕西科技大学,造纸工程学院,陕西,西安,710021
2. 陕西省农业机械研究所,陕西,咸阳,712000
摘    要:采用供气式低压射流曝气系统改良型氧化沟工艺处理制浆造纸中段废水,对整个调试运行过程进行了介绍。实际运行结果表明,该工艺设计合理,运行稳定可靠,出水COD≤150mg/L、SS≤80mg/L、BOD5≤80mg/L,去除率均大于85%,出水水质达到了《造纸工业水污染物排放标准》(GB3544-2001)。

关 键 词:制浆造纸废水  低压射流曝气  改良型氧化沟  调试

Oxidation Ditch Process Using Low-pressure Jet Aeration System for Treatment of Middle-stage Wastewater from Pulping and Papermaking
ZHANG An-long,LIU Chun,ZHANG Jian-an.Oxidation Ditch Process Using Low-pressure Jet Aeration System for Treatment of Middle-stage Wastewater from Pulping and Papermaking[J].China Water & Wastewater,2008,24(22).
Authors:ZHANG An-long  LIU Chun  ZHANG Jian-an
Affiliation:ZHANG An-long1,LIU Chun1,ZHANG Jian-an2(1.College of Papermaking Engineering,Shaanxi University of Science , Technology,Xi\'an 710021,China,2.Shaanxi Agricultural Machinery Institute,Xianyang 712000,China)
Abstract:An improved oxidation ditch process using forced air supply low-pressure jet aeration system was used to treat middle-stage wastewater from pulping and papermaking.The whole commissioning of the process is introduced.The operation results indicated that the process has rational design and the system has stable and reliable operation.The effluent COD,SS and BOD5,are less than or equal to 150 mg/L,80 mg/L and 80 mg/L respectively,and their removal rates are all higher than 85%.The effluent quality meets the D...
Keywords:pulping and papermaking wastewater  low-pressure jet aeration system  improved oxidation ditch  commissioning  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号