| L形、Z形截面压弯承载力实用计算方法 |
| |
| 引用本文： | 聂礼鹏,周德源,王奎兴.L形、Z形截面压弯承载力实用计算方法[J].结构工程师,2000(4):6-11. |
| |
| 作者姓名： | 聂礼鹏 周德源 王奎兴 |
| |
| 作者单位： | 1. 同济大学,上海,200092
2. 上海市嘉定建筑设计院,上海,201800 |
| |
| 摘 要： | 本文从工程人员常用的简化方法入手，采用非线性分析程序分析了大量算例，建立了Ｌ形、Ｚ形截面承载力与腹板矩形承载力之间的关系，将复杂的异形截面承载力计算转化为简单的矩形截面承载力计算，提出了一种既能定性又能定量的实用计算方法。
|
| 关 键 词： | L形柱 Z形柱 压弯承载力 计算方法 |
A Practical Method to Calculate the Compression-Bending Capacity of L-shape and Z-shape Columns |
| |
| NIE Lipen,ZHOU Deyuan,WANG Kuixin.A Practical Method to Calculate the Compression-Bending Capacity of L-shape and Z-shape Columns[J].Structural Engineers,2000(4):6-11. |
| |
| Authors: | NIE Lipen ZHOU Deyuan WANG Kuixin |
| |
| Abstract: | In this paper, by using nonlinear analysis program a lot of examples are calculated and the compression-benging capacity relationship between L-shape and Z-shape section and the corresponding rectangular sections is determined. Thus the complicated capacity calculation of L-shape and Z-shape section is transformed to the simple capacity calculation of rectangular sec- tion. And a practical method of calculating for the compression-bending capacity of L-shape and Z-shape column is brought out. |
| |
| Keywords: | L-shape Z-shape compression-bending capacity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
