首页 | 本学科首页   官方微博 | 高级检索  
     

基于WLSM的多参数裂隙岩体统计均质区划分
引用本文:阮云凯,陈剑平,李严严,朱雷,曹琛,占洁伟.基于WLSM的多参数裂隙岩体统计均质区划分[J].岩土工程学报,2016,38(7):1277-1282.
作者姓名:阮云凯  陈剑平  李严严  朱雷  曹琛  占洁伟
作者单位:1. 吉林大学建设工程学院,吉林 长春 130026;;2. 中国科学院地质与地球物理研究所 ,北京 100029;;3. 地质灾害防治与地质环境保护国家重点实验室(成都理工大学),四川 成都,610059
基金项目:国家自然科学基金重点项目(41330636)
摘    要:岩体统计均质区的划分一直是岩土工程领域研究的重要课题。大多学者采用产状或者其它单一参数划分岩体统计均质区,却很少有人考虑多参数进行划分研究。考虑了产状、间距、张开、迹长和粗糙度共5个参数,提出了一种划分裂隙岩体统计均质区的新方法,即采用权的最小平方法确定参数的权重并用相关系数法计算研究区裂隙各个参数之间的相关性,从而确定均质系数以此实现对裂隙岩体统计均质区的划分。通过工程实例即云南省马吉水电站左岸坝肩某一高程相邻4个平硐的岩体结构统计均质区划分,分析了多参数对裂隙岩体统计均质区划分的影响。研究结果表明:裂隙岩体统计均质区划分与裂隙产状、间距、张开、迹长和粗糙度等因素有关并成功划分了研究区的统计均质区,证明了该方法的可行性。

关 键 词:统计均质区  多参数  权的最小平方法  相关系数法  均质系数(HI)  
收稿时间:2015-07-28

Evaluation of statistical homogeneity of jointed rock masses based on weighted least-square method
RUAN Yun-kai,CHEN Jian-ping,LI Yan-yan,ZHU Lei,CAO Cen,ZHAN Jie-wei.Evaluation of statistical homogeneity of jointed rock masses based on weighted least-square method[J].Chinese Journal of Geotechnical Engineering,2016,38(7):1277-1282.
Authors:RUAN Yun-kai  CHEN Jian-ping  LI Yan-yan  ZHU Lei  CAO Cen  ZHAN Jie-wei
Affiliation:1. College of Construction Engineering, Jilin University, Changchun 130026, China;2. Institute of Geology and Geophysics, Chinese Academy of Sciences, Beijing 100029, China;3. State Key Laboratory of Geological Hazards Prevention and Geological Environment Protection, Chengdu University of Technology, Chengdu 610059, China
Abstract:The identification of structural homogeneity has been an important topic in the field of geotechnical engineering. Most of scholars use joint orientations or the other joint parameters to identify statistically homogeneous regions or structural domains in a jointed rock mass. However, few studies have been conducted by integrating both of them. Five parameters are considered for this identification, namely: joint orientation, spacing, aperture, trace length and roughness. Based on the weighted least-square method, the weights of the parameters are obtained. A statistical parameter, known as the correlation coefficient, is used to quantify the degree of the similarity between the joint parameters collected from the studied regions. The overall homogeneity of the rock mass is determined based on the homogeneity index. A practical engineering case is analyzed, illustrating the effect of the multiple parameters collected from four adjacent adits at Maji dam site on the left bank of the Nujiang River in Yunnan Province on identification of statistical homogeneity in fractured rock mass. The results indicate that the identification of statistical homogeneity is influenced by many factors such as the joint orientations, spacing, aperture, trace length and roughness. The statistical homogeneous domains in the studied regions are successfully divided, indicating the feasibility of the proposed method.
Keywords:statistical homogeneity  multiple joint parameters  weighted least-square method  correlation coefficient  homogeneity index  
本文献已被 CNKI 等数据库收录!
点击此处可从《岩土工程学报》浏览原始摘要信息
点击此处可从《岩土工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号