首页 | 本学科首页   官方微博 | 高级检索  
     

复合型钢管节点试验研究
引用本文:倪建公,张亚,罗永峰,刘沈如.复合型钢管节点试验研究[J].建筑结构,2012(3):65-71.
作者姓名:倪建公  张亚  罗永峰  刘沈如
作者单位:同济大学土木工程学院;中船第九设计研究院工程有限公司;宝钢钢构有限公司
摘    要:以某大型起重机栈桥桁架结构为工程背景,通过实际结构中一个重要的复合型钢管节点的足尺模型和缩尺模型试验,并结合有限元数值模拟分析,对该类复合型钢管节点的受力性能和破坏模式进行了研究。研究结果表明,该类节点的控制部位为受拉斜腹杆与节点板的交接部位,节点的破坏模式为该处因为应力集中和焊接缺陷而导致钢管开裂,随着荷载的增加,裂缝进一步发展,从而使得节点丧失承载能力。实际结构中的该类节点在设计荷载作用下处于安全状态,但其设计安全度宜适当提高。

关 键 词:钢管结构  复合型节点  模型试验  破坏模式

Experimental study on mixed joints of steel pipe structure
Ni Jiangong,Zhang Ya,Luo Yongfeng,Liu Shenru.Experimental study on mixed joints of steel pipe structure[J].Building Structure,2012(3):65-71.
Authors:Ni Jiangong  Zhang Ya  Luo Yongfeng  Liu Shenru
Affiliation:1(1 College of Civil Engineering,Tongji University,Shanghai 200092,China;2 Shipbuilding NDRI Engineering Co., Ltd.,Shanghai 200063,China;3 Bao Steel Construction Co.,Ltd.,Shanghai 201900,China)
Abstract:Based on the engineering background of a crane tressel truss,full-scale and reduced-scale tests,as well as finite element analysis,for mixed joints of steel pipe,were performed to investigate the carrying performance and failure mode of this kind of joint.The results indicate that the control part of the joint lies in the connection part of the gusset plate and the tensile diagonal web member.The failure mode is that the steel pipe crack because of the stress concentric and the weld defects.The crack developed with the load increasing until the joint failed.The joint in the engineering structure is safe under service load,but its safety degree should be improved.
Keywords:steel pipe structure  mixed joint  model experiment  failure mode
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号