| CrN活塞环涂层的工艺制备与摩擦学性能研究 |
| |
| 引用本文： | 蔡志海,张平,赵军军,杜军,牛庆银.CrN活塞环涂层的工艺制备与摩擦学性能研究[J].核技术,2009,32(6). |
| |
| 作者姓名： | 蔡志海 张平 赵军军 杜军 牛庆银 |
| |
| 作者单位： | 1. 装甲兵工程学院装备再制造技术国防科技重点实验室,北京,100072
2. 装甲兵工程学院训练部,北京,100072 |
| |
| 基金项目： | 装备再制造技术国防科技重点实验室预研基金 |
| |
| 摘 要： | 论文采用多弧离子镀技术在活塞环表面制备了CrN涂层,系统地研究了不同N2含量对CrN涂层的相结构和纳米硬度的影响规律.并采用CETR微动摩擦磨损试验机比较研究了Cr电镀层与CrN涂层的高温微动摩擦磨损性能,研究结果表明:随着N2含量的增加,薄膜由Cr2N(211)相过渡到CrN(220)相;膜层的纳米硬度随N2含量的增加而增大,并出现两个峰值;与Cr电镀层相比,CrN涂层主要以磨粒磨损为主,犁沟较窄且平滑,抗高温粘着磨损性能明显增强,而且摩擦系数较小,具有较好的摩擦匹配性能,更适合用于活塞环服役的高温磨损环境.
|
| 关 键 词： | 活塞环 多弧离子镀 CrN涂层 摩擦学性能 |
Investigation of preparation technique and tribological properties of CrN piston rings coatings |
| |
| CAI Zhihai,ZHANG Ping,ZHAO Junjun,DE Jun,NIU Qingyin.Investigation of preparation technique and tribological properties of CrN piston rings coatings[J].Nuclear Techniques,2009,32(6). |
| |
| Authors: | CAI Zhihai ZHANG Ping ZHAO Junjun DE Jun NIU Qingyin |
| |
| Affiliation: | Academy of Armored Force Engineering;National Key Laboratory for Remanufacturing;Beijing 100072;China;Academy of Armored Force Engineering;Educational Department;China |
| |
| Abstract: | By using multi-ion plating,CrN films were made on surface of piston rings to improve its tribological properties and service life.Effects of nitrogen content to prepare the film on hardness and phase structure were studied.The high-temperature tribological properties of Cr plating and CrN films were compared with CETR friction tester.The results show that nitrogen partial pressure significantly affects the mechanical properties of CrN films.With increasing N2 partial pressure,preferential growth orientation... |
| |
| Keywords: | Piston rings Multi-ion plating CrN coatings Tribological properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
