| 核电厂凝汽器管束模块内流动及换热特性数值分析 |
| |
| 引用本文： | 李国栋,王涛,周建,郭兴刚,刘国栋.核电厂凝汽器管束模块内流动及换热特性数值分析[J].核动力工程,2020,41(3):52-56. |
| |
| 作者姓名： | 李国栋 王涛 周建 郭兴刚 刘国栋 |
| |
| 作者单位： | 苏州热工研究院有限公司,广东深圳,518000,苏州热工研究院有限公司,广东深圳,518000,辽宁红沿河核电有限公司,辽宁大连,116000,辽宁红沿河核电有限公司,辽宁大连,116000,哈尔滨工业大学,哈尔滨,150001 |
| |
| 摘 要： | 针对国内某核电厂凝汽器钛管变形问题，采用多相流动CFD方法开展凝汽器内部管束模块不同工况下的流动和换热特性分析，采用有限元分析局部钛管受力情况。研究结果表明，凝汽器在冬季临停工况下，空冷区将结冰；机组启动时，在凝汽器内部流场力及重力作用下冰体运动而损伤钛管，造成凝汽器空冷区周边钛管大规模变形。
|
| 关 键 词： | 凝汽器 钛管 变形 循环水 结冰 |
Numerical Analysis of Flow and Heat Transfer Characteristics in Condenser Tube Bundle Module of Nuclear Power Plant |
| |
| Li Guodong,Wang Tao,Zhou Jian,Guo Xinggang,Liu Guodong.Numerical Analysis of Flow and Heat Transfer Characteristics in Condenser Tube Bundle Module of Nuclear Power Plant[J].Nuclear Power Engineering,2020,41(3):52-56. |
| |
| Authors: | Li Guodong Wang Tao Zhou Jian Guo Xinggang Liu Guodong |
| |
| Abstract: | Aiming at the deformation problem of the condenser titanium tube of a nuclear power plant in China, the multi-phase flow CFD method was used to analyze the flow and heat transfer characteristics of the internal tube bundle module in different working conditions, and the stress of local titanium tube by finite element method. The research results show that when the unit stops temporarily in winter, the air cooling area of the condenser will be frozen. When the unit starts, Titanium pipes were damaged by ice moving due to the gravity and force of the flow field inside the condenser, caused large-scale deformation of the titanium tube around the air-cooling zone of the condenser. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《核动力工程》浏览原始摘要信息 |
|
点击此处可从《核动力工程》下载全文 |
|
