| 隔水管输送机关键部件设计与分析 |
| |
| 引用本文： | 肖文生,夏新艳,刘忠砚,刘健,刘金荣.隔水管输送机关键部件设计与分析[J].石油矿场机械,2012(9):37-40. |
| |
| 作者姓名： | 肖文生 夏新艳 刘忠砚 刘健 刘金荣 |
| |
| 作者单位： | 1. 中国石油大学华东机电工程学院,山东 青岛 266580
2. 甘肃蓝科石化高新装备股份有限公司 石油装备部,兰州 730070 |
| |
| 摘 要： | 针对海洋钻井平台使用平放隔水管的情况,设计了隔水管处理系统输送机的关键部件,主要包括前后置推车和新型输送机扶管臂的设计。利用有限元分析软件ANSYS对输送机前后置推车进行了作业状态时的强度分析,分析结果符合作业要求。
|
| 关 键 词： | 隔水管 输送机 前后置推车 扶管臂 强度分析 |
Design and Analysis of the Key Parts of Riser＇s Conveyor |
| |
| XIAO Wen-sheng,XIA Xin-yan,LIU Zhong-yan,LIU Jian,LIU Jin-rong.Design and Analysis of the Key Parts of Riser＇s Conveyor[J].Oil Field Equipment,2012(9):37-40. |
| |
| Authors: | XIAO Wen-sheng XIA Xin-yan LIU Zhong-yan LIU Jian LIU Jin-rong |
| |
| Affiliation: | 1. College of Mechanical and Electrical Engineering ,China University of Petroleum, Qingdao 266580, China; 2. Lanpec Technologies Limited, Lanzhou 730070, China) |
| |
| Abstract: | Today offshore drilling has been developed very well, according to the used horizontal risers in the offshore drilling platforms, the conveyor structure of the riser handling system was designed,which mainly includes the design of the front and rear carts, the innovative tail-in arm attached to the conveyor. At the same time, the extensive FEA soft ANSYS was used to analyze the strength of the front and rear carts when they were in operation,and the analysis results fitted with the working requirement. |
| |
| Keywords: | riser conveyor front and rear carts tail-in arm strength analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
