| 热等压法钢塑复合管生产技术研究 |
| |
| 引用本文： | 周勇军,顾伯勤,朱廷风,钱维联.热等压法钢塑复合管生产技术研究[J].石油化工设备技术,2001,22(6):58-59,62. |
| |
| 作者姓名： | 周勇军 顾伯勤 朱廷风 钱维联 |
| |
| 作者单位： | 南京化工大学机械工程学院, |
| |
| 摘 要： | 针对目前钢塑复合管道的生产现状,分析了导致钢塑复合管质量问题的原因.在此基础上开发了热等压法钢塑复合新技术.该技术生产成本低,且无污染.所生产的钢塑复合管道其内衬层与钢管基体贴合好、使用寿命长.采用不同材质的衬管、控制复合温度和压力,可以生产出满足不同工况、不同介质要求的产品.文中介绍了该生产技术的原理、特点以及产品检验内容和方法.
|
| 关 键 词： | 热等压法 塑料管 钢管 复合管 |
| 文章编号： | 1006-8805(2001)06-0058-02 |
| 修稿时间： | 2001年3月8日 |
The Research on Production Technology of Thermal Isobaric Method Steel Plastic Clad Tube |
| |
| Zhou Yongjun,et al..The Research on Production Technology of Thermal Isobaric Method Steel Plastic Clad Tube[J].Petro-Chemical Equipment Technology,2001,22(6):58-59,62. |
| |
| Authors: | Zhou Yongjun |
| |
| Affiliation: | Zhou Yongjun,et al.Nanjing chemical university,mechanical engineering department,P.C 210009 |
| |
| Abstract: | In accordance with the production stituation of steel plastic cald tube at present,the reason of quality problem for steel plastic clad tube is analized.On this basis,the new technology of thermal isobaric method steel plastic clad tube is developed.The cost of that technology is low and without pollution.The bond between inner plastic lining and steel tube base metal of that steel plastic clad tube is good,and the service life is long.By adopting variable material lining tube,controling the clad temperature and pressure,the product,which can satisfy for the requirement of different working condition and different medium,can be fabricated.The principle and feature of that production technology,the inspection content and method,are recommended in this asticle. |
| |
| Keywords: | Thermal isobaric method Plastic tube Steel tube Clad tube |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
