LZ-5G型脱硝剂在蜡油催化裂化装置的工业应用 |
| |
引用本文: | 金松,宋阳,李晓光,焦岩.LZ-5G型脱硝剂在蜡油催化裂化装置的工业应用[J].石油炼制与化工,2019,50(5):106-109. |
| |
作者姓名: | 金松 宋阳 李晓光 焦岩 |
| |
作者单位: | 中国石油抚顺石化公司石油二厂 |
| |
摘 要: | 为了降低外排烟气中NOx 浓度,满足国家烟气排放新标准,中国石油抚顺石化公司在1.2 Mt/a催化裂化装置上应用LZ-5G型脱硝剂,结果表明:在原料性质及主要操作条件基本不变的前提下,加入LZ-5G型脱硝剂后,再生烟气中氮氧化物质量浓度由空白标定的350 mg/m3降低至125 mg/m3,满足工业外排烟气中NOx质量浓度不大于200 mg/m3的烟气排放新标准。LZ-5G型脱硝剂试用期间,催化裂化装置操作平稳,平衡催化剂微反活性提高0.2百分点,轻油(汽油+柴油)收率提高0.16百分点,对平衡催化剂活性、产品分布、产品质量及性质无不良影响。
|
关 键 词: | 催化裂化 脱销剂 氮氧化物 |
收稿时间: | 2018-08-23 |
修稿时间: | 2019-01-03 |
INDUSTRIAL APPLICATION OF LZ-5G DENITRATION AGENT IN FCC UNIT |
| |
Abstract: | The industrial application of LZ-5G denitration agent on 1.2 Mt/a FCC unit of PetroChina Fushun Petrochemical Company was introduced. The results showed that at the similar nature of the raw materials and the main operation conditions, adding LZ-5G type denitration agent reduced the nitrogen oxides in the regenerated flue gas from 350 mg/m3 of blank calibration to 125 mg/m3, meeting national standard for NOx emission requirement of less than 200 mg/m3. During the trial period of LZ-5G denitration agent, the FCC unit was operated smoothly, the micro-reaction activity of the equilibrium catalyst increased by 0.2 percentage points, the yield of light oil (gasoline + diesel) increased by 0.16 percentage points, and there was no bad effects on equilibrium catalyst activity, product distribution, product quality and product properties. |
| |
Keywords: | FCC denitration agent nitrogen oxides |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《石油炼制与化工》浏览原始摘要信息 |
|
点击此处可从《石油炼制与化工》下载全文 |
|