| 液压式套管滚珠整形器的研制与应用 |
| |
| 引用本文： | 刘成双,孙超,王秋萍,谢敏,闫晶波.液压式套管滚珠整形器的研制与应用[J].石油机械,2011(11):55-56,89. |
| |
| 作者姓名： | 刘成双 孙超 王秋萍 谢敏 闫晶波 |
| |
| 作者单位： | 吉林油田公司采油工艺研究院; |
| |
| 摘 要： | 针对套管变形修复技术中机械整形(冲胀和磨铣工艺)普遍存在损伤套管、牺牲套管厚度、修整尺寸小、施工周期长和成本高等问题,研制了液压式套管滚珠整形器。该整形器采用变径钢珠滚压套管内壁的设计,将以往常规机械整形的面接触变为点接触,可大幅增加胀压力,且不损伤套管;中心轴内含短行程的设计确保钢珠胀管突出后能够适量缩回,防止作业管柱卡井;泄压后提放管柱工具可复位,可以实现长距离连续整形;应用小修作业机和泵车即可实施作业。该整形器在现场应用中收到很好的效果。
|
| 关 键 词： | 套损井 液压套管整形器 机械整形 冲胀 磨铣 |
The development and application of the hydraulic casing ball shaper |
| |
| Liu Chengshuang,Sun Chao,Wang Qiuping,et al.The development and application of the hydraulic casing ball shaper[J].China Petroleum Machinery,2011(11):55-56,89. |
| |
| Authors: | Liu Chengshuang Sun Chao Wang Qiuping |
| |
| Affiliation: | Liu Chengshuang(Research Institute of Oil Production Technology,Jilin Oilfield Company,Songyuan City,Jilin Province),Sun Chao,Wang Qiuping,et al |
| |
| Abstract: | Owing to such problems as casing damage, casing thickness loss, small dressing dimensions, long construction cycle and high costs universally existing in mechanical shaping (i.e. swelling and milling technologies) of casing deformation repair technology, the hydraulic casing ball shaper was developed. The shaper adopts the design of variable diameter steel ball rolling on the casing inner wall. It changes the surface contact of the previous ordinary mechanical shaping into the point contact, which can incre... |
| |
| Keywords: | casing damage well hydraulic casing shaper mechanical shaping swelling milling |
| 本文献已被 CNKI 等数据库收录！ |
|
