| 液动射流冲击器顶紧及密封机构设计与试验 |
| |
| 引用本文： | 张海平,索忠伟,张辉,刘晓丹.液动射流冲击器顶紧及密封机构设计与试验[J].石油机械,2011(8):4-6,2. |
| |
| 作者姓名： | 张海平 索忠伟 张辉 刘晓丹 |
| |
| 作者单位： | 中国石化石油工程技术研究院; |
| |
| 基金项目： | 国家“863”计划项目“高效破岩冲击器的研制及旋冲破岩工艺技术研究”(2006AA06A109) |
| |
| 摘 要： | 针对以往液动射流冲击器中元件压盖与射流元件之间出现的密封失效、缸体变形及活塞运动受阻等问题,设计了新型碟簧元件顶紧及密封机构。对该密封机构进行了理论计算、强度校核和性能测试试验,得出了该结构射流冲击器的最大冲击功、冲击频率和冲击末速度以及冲击器性能参数与操作参数之间的关系曲线。试验结果表明,该液动射流冲击器工作正常,稳定性良好,在不同排量下具有稳定的冲击功、冲击末速度和冲击频率。现场应用中,可以通过调节冲击器的行程参数和操作参数获得最佳的冲击功和冲击频率,以满足地层岩性的钻井需求。
|
| 关 键 词： | 液动射流冲击器 碟形弹簧 预紧力 顶紧机构 密封机构 |
The design and experiment of the retaining and sealing mechanism for hydraulic jet hammer |
| |
| Zhang Haiping,Suo Zhongwei,Zhang Hui,et al..The design and experiment of the retaining and sealing mechanism for hydraulic jet hammer[J].China Petroleum Machinery,2011(8):4-6,2. |
| |
| Authors: | Zhang Haiping Suo Zhongwei Zhang Hui |
| |
| Affiliation: | Zhang Haiping(Research Institute of Petroleum Engineering Technology,SINOPEC,Beijing),Suo Zhongwei,Zhang Hui,et al. |
| |
| Abstract: | In light of the problems such as sealing failure, cylindrical deformation and piston movement hindrance between element gland and jet element in previous hydraulic jet hammer, a new type of disc spring element tightening and sealing mechanism was designed. The theoretical calculation, strength checking and performance testing of the mechanism were conducted. The experiment obtained the maximum impact energy, impact frequency and last impacting velocity of the hammer as well as the relationship curve between... |
| |
| Keywords: | hydraulic jet hammer disc spring pre-tightening force retaining and sealing mechanism |
| 本文献已被 CNKI 等数据库收录！ |
|
