首页 | 本学科首页   官方微博 | 高级检索  
     

遇油膨胀封隔器胶筒应力的有限元分析
引用本文:步玉环,马明新,臧艳彬.遇油膨胀封隔器胶筒应力的有限元分析[J].石油机械,2011,39(6):25-28,93.
作者姓名:步玉环  马明新  臧艳彬
作者单位:1. 中国石油大学(华东)石油工程学院
2. 中国石油大学(华东)石油工程学院;胜利石油管理局
基金项目:国家自然科学基金项目(E50974130); 中央高校基本科研业务费专项资金资助项目“固井施工模拟与安全监控系统”(2008BAB37B03-3)
摘    要:封隔器验封过程中,常规方法存在验封过程复杂,人为因素影响大以及成本高等缺点。为此,采用有限元法对遇油膨胀封隔器在井下各种工况下的密封性进行了研究,以建立不同压力下遇油膨胀封隔器的密封性评判标准为研究目标,以期为现场遇油膨胀封隔器的密封性判断提供理论依据。采用超弹性单元和四边形单元建立中心管、胶筒和套管的模型,表面粗糙度的模拟通过随机曲线来体现。分析模拟结果认为,胶筒上、下无论是承受压差还是不承受压差,最大接触压力都位于胶筒的中部位置。在胶筒承受压差的作用下,下方胶筒的接触压力大于上方胶筒的接触压力。

关 键 词:Swellpacker  胶筒  接触压力  密封性  有限元分析

A finite element analysis of stress on swell packer rubber.
Bu Yuhuan , Ma Mingxin , Zang Yanbin.A finite element analysis of stress on swell packer rubber.[J].China Petroleum Machinery,2011,39(6):25-28,93.
Authors:Bu Yuhuan  Ma Mingxin  Zang Yanbin
Affiliation:Bu Yuhuan(College of Petroleum Engineering,China University of Petroleum,Dongying City,Shandong Province),Ma Mingxin,Zang Yanbin.
Abstract:The study of the relationship between operating pressure differential and contact pressure is of vital importance to the seal reliability of packer rubber.The finite element method was used to study the seal of the swell packer in all kinds of downhole operating conditions,so as to establish the criteria to evaluate the packer seal under different pressures and to provide the theoretical basis for the judgment of the on-the-spot swell packer seal.The hyperelastic unit and quadrilateral unit were adopted to ...
Keywords:swell packer  packer rubber  contact pressure  seal  finite element analysis  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号