首页 | 本学科首页   官方微博 | 高级检索  
     

库车坳陷克拉苏-依奇克里克构造带构造挤压型超压识别与计算
引用本文:王冰,邱楠生,王祥,张海祖,刘一锋,常健,朱传庆.库车坳陷克拉苏-依奇克里克构造带构造挤压型超压识别与计算[J].石油学报,2022,43(8):1107-1121.
作者姓名:王冰  邱楠生  王祥  张海祖  刘一锋  常健  朱传庆
作者单位:1. 中国石油大学(北京)油气资源与探测国家重点实验室 北京 102249;2. 中国石油大学(北京)地球科学学院 北京 102249;3. 中国石油塔里木油田公司勘探开发研究院 新疆库尔勒 841000;4. 浙江大学海洋学院 浙江舟山 316021
基金项目:国家自然科学基金项目(No.U19B6003-02-03)和中国石油天然气股份有限公司塔里木油田分公司校企合作项目(041020050021)资助。
摘    要:强烈的构造挤压对地层超压的形成和演化具有重要影响,对构造挤压型超压的判识与估算有待进一步深入研究。综合岩石力学特征与储集物性参数的相关性,系统分析了相同应力条件下,构造挤压型超压地层和静水压力地层在垂向有效应力、声波速度、密度测井响应等方面的差异,建立了构造挤压型超压的识别模版。依据孔隙弹性理论,改进了传统的等效深度法并提出了构造挤压型超压的计算方法——平均应力法。综合实钻压力、区域地质资料和泥岩综合压实特征,在库车坳陷克拉苏-依奇克里克构造带识别出不同强度的构造挤压型超压。基于三维主应力计算,定量评估了构造挤压引起的增压量。构造挤压是克拉苏-依奇克里克构造带地层超压的重要成因机制,其对地层超压的贡献率与构造强度具明显正相关性,在克拉苏构造带KS6井区,构造挤压对超压的贡献率为43.2%~44.4%,在DB6井区的贡献率为34.1%~39.3%;在依奇克里克构造带YS4井区,构造挤压贡献率为32.8%~34.7%,在TX1井区的贡献率为21.1%~22.0%。研究方法与认识可以为预测构造挤压型盆地的地层压力提供研究思路、为有利储层的寻找提供理论指导。

关 键 词:超压  构造挤压  成因识别  压力计算  库车坳陷  
收稿时间:2021-07-01
修稿时间:2022-02-12

Identification and calculation of tectonic compression overpressure of Kelasu-Yiqikelike tectonic belt in Kuqa depression
Wang Bing,Qiu Nansheng,Wang Xiang,Zhang Haizu,Liu Yifeng,Chang Jian,Zhu Chuanqing.Identification and calculation of tectonic compression overpressure of Kelasu-Yiqikelike tectonic belt in Kuqa depression[J].Acta Petrolei Sinica,2022,43(8):1107-1121.
Authors:Wang Bing  Qiu Nansheng  Wang Xiang  Zhang Haizu  Liu Yifeng  Chang Jian  Zhu Chuanqing
Affiliation:1. State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Beijing 102249, China;2. College of Geosciences, China University of Petroleum, Beijing 102249, China;3. Exploration and Development Research Institute, PetroChina Tarim Oilfield Company, Xinjiang Korla 841000, China;4. Ocean College, Zhejiang University, Zhejiang Zhoushan 316021, China
Abstract:Strong tectonic compression has an important influence on the generation and evolution of formation overpressure,and the identification and estimation of tectonic compression overpressure need to be further studied.Based on the correlation between rock mechanics characteristics and reservoir physical property parameters,This paper systematically analyzes the differences of vertically effective stress,acoustic velocity and density logging response between tectonic compression overpressure formation and hydrostatic pressure formation under the same stress condition,and establishes the identification template of tectonic compression overpressure.According to the pore elasticity theory,the traditional equivalent depth method has been improved,and the calculation method of tectonic compression overpressure (mean stress method) is also proposed.Based on actual drilling pressure,regional geological data and comprehensive compaction characteristics of mudstone,the paper identifies the tectonic compression overpressure with different strengths in the Kelasu-Yiqikelike tectonic belt of Kuqa depression.Based on the calculation of three-dimensional principal stress.Then a quantitative evaluation is performed on the pressurization caused by tectonic compression.Tectonic compression plays an important role in the genetic mechanism of formation overpressure in Kelasu-Yiqikelike tectonic belt,and its contribution rate for formation overpressure is obviously positively correlated with tectonic strength.The contribution rate of tectonic compression in Well KS6 area of Kelasu tectonic belt ranges from 43.2% to 44.4%,and that in Well DB6 area is from 34.1% to 39.3%.The contribution rate of tectonic compression in Well YS4 area of Yiqikelike tectonic belt ranges between 32.8% and 34.7%,and that in Well TX1 area is between 21.1% and 22.0%.The research methods and understanding will provide research ideas for the formation pressure prediction of tectonic compression basins and a theoretical guidance for seeking favorable reservoirs.
Keywords:overpressure  tectonic compression  genetic identification  pressure calculation  Kuqa depression  
点击此处可从《石油学报》浏览原始摘要信息
点击此处可从《石油学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号