ZJ17卷烟机卷烟纸施胶系统的改进

为实现对卷烟纸均匀稳定施胶,对ZJ17卷烟机卷烟纸施胶系统进行改进设计,在其胶缸和喷胶嘴之间依次加装齿轮泵和质量流量计,并通过PLC控制器控制驱动齿轮泵的伺服电机,以及实现质量流量计的跟踪反馈。使用效果表明,改进后,同一机台卷烟机施胶量的标准偏差由原来的0.17mg/支降低到0.02 mg/支;不同机台施胶量由原来相差2.35 mg/支,降低到0.30 mg/支;卷烟感官质量稳定一致,改进设计的施胶系统具有很强的市场利用价值。

Improvement of ZJ17 cigarette machine in cigarette paper sizing system

Improvement was made on the cigarette paper sizing system of ZJ17 cigarette machine. The gear pump and the mass flow meter is between the original rubber cylinder and spray nozzle, and through the PLC controller to control the servo motor to drive the gear pump, the mass flow meter tracking feedback, the sizing of cigarette paper uniform stability. Application effects showed that the standard deviation of a cigarette machine sizing decreased from 0.17 mg per cigarette to 0.02 mg per cigarette, different equipment sizing from the original difference 2.35 mg per cigarette reduced to the maximum difference 0.30 mg per cigarette after improved, and the cigarette sensory quality stable and consistent. The improved sizing system design has a very strong market value in use.