| 常压油炸马铃薯脆片加工工艺参数的研究 |
| |
| 引用本文： | 张喻,谭兴和,熊兴耀,吴卫国,黄玉林.常压油炸马铃薯脆片加工工艺参数的研究[J].食品科学,2006,27(7):132-135. |
| |
| 作者姓名： | 张喻 谭兴和 熊兴耀 吴卫国 黄玉林 |
| |
| 作者单位： | 湖南农业大学食品科技学院； 湖南农业大学园艺园林学院 |
| |
| 摘 要： | 以适于油炸加工的马铃薯品种--大西洋为原料,研究了切片厚度、坯料烘干时间(含水量)、被膜剂浓度、油炸时间、油炸温度对常压油炸马铃薯脆片品质的影响,确定了常压油炸马铃薯脆片的加工工艺参数,即马铃薯切片厚度为2.0mm,油炸坯料于50℃温度下烘80min,含水量控制在60%左右,油炸前用0.8%的CMC-Na溶液被膜,在180℃油温下炸制2min。
|
| 关 键 词： | 马铃薯 马铃薯脆片 常压油炸 加工 工艺 |
| 文章编号： | 1002-6630（2006）07-0132-04 |
| 收稿时间： | 2005-08-16 |
| 修稿时间： | 2005-08-16 |
Study on Processing Technological Parameters of Fried Potato Chips at Normal Atmospheric Pressure |
| |
| ZHANG Yu,TAN Xing-he,XIONG Xing-yao,WU Wei-guo,HUANG Yu-lin.Study on Processing Technological Parameters of Fried Potato Chips at Normal Atmospheric Pressure[J].Food Science,2006,27(7):132-135. |
| |
| Authors: | ZHANG Yu TAN Xing-he XIONG Xing-yao WU Wei-guo HUANG Yu-lin |
| |
| Affiliation: | 1.College of Food Science and Technology, Hunan Agricultural University, Changsha 410128, China; 2.College of Horticultural and Landscape, Hunan Agricultural University, Changsha 410128, China |
| |
| Abstract: | A kind of fried chips was made with special potato variety (Atlantic) suitable for deep-fat frying at normal atmospheric pressure. The effects of thickness, drying time (water content), the concentration of the coating, frying temperature and frying time on quality of product were studied. The results showed that the optimum conditions are as follows: thickness of slices 2.0mm, drying time 80min at 50℃, and water content of semi-product controlled about 60% with-product coated with the solution of CMC-Na 0.8% and frying time 2min at 180℃. |
| |
| Keywords: | potato fried potato chip frying at normal atmospheric pressure process technology |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《食品科学》浏览原始摘要信息 |
|
点击此处可从《食品科学》下载全文 |
|
