| 硅溶胶强化复合木材制备工艺研究 |
| |
| 引用本文： | 林兰英,傅峰.硅溶胶强化复合木材制备工艺研究[J].木材加工机械,2011,22(4). |
| |
| 作者姓名： | 林兰英 傅峰 |
| |
| 作者单位： | 中国林业科学研究院木材工业研究所,北京,100091 |
| |
| 基金项目： | 林业行业专项“杉木实木功能地板创制关键技术研究，中央级公益科研院所基本科研业务费专项“硅溶胶复合木材细胞壁微观结构表征”，国家自然科学基金青年科学基金项目“木材细胞壁功能化作用机理及表征” |
| |
| 摘 要： | 以硅溶胶为浸渍处理液,采用真空加压复合工艺制备强化杨树复合木材。集中研究了前真空时间、浸渍压力、浸渍时间、后真空处理时间4个浸渍工艺因子对复合木材性能的影响。结果表明,延长前真空处理时间和提高浸渍压力可以获得较高增重率的复合木材;经真空加压处理后的硅溶胶复合木材抗弯强度和抗弯弹性模量都得到提高,但为了获得较好的弯曲性能,不宜选用较高的浸渍压力和较长的浸渍时间。对于人工林杨树木材,在本研究条件下最适宜的浸渍处理工艺为：前真空时间20min,浸渍压力1.0MPa,浸渍时间30min,后真空时间为20min。
|
| 关 键 词： | 复合木材 硅溶胶 强化 工艺 |
Study on preparation of wood composites strengthened by silica sol |
| |
| LIN Lan-ying,FU Feng.Study on preparation of wood composites strengthened by silica sol[J].Wood Processing Machinery,2011,22(4). |
| |
| Authors: | LIN Lan-ying FU Feng |
| |
| Affiliation: | LIN Lan-ying,FU Feng(Research Institute of Wood Industry,Chinese Academy of Forestry,Beijing 100091,China) |
| |
| Abstract: | Silica sol composites were prepared through vacuum-pressure process.Focused on the mainly process factors,performance of composites was investigated.The results showed that the longer vacuum time before impregnating and higher impregnating pressure can improved weight percentage gain of composite wood.Through vacuum-pressure treatment,bending strength and elastic modulus of the composite wood were improved,but higher impregnating pressure and longer impregnating time may reduce the bending properties.The optimal impregnating process parameters for poplar wood,such a soft wood,were as follows： the vacuum time before impregnating was 20 min,impregnating pressure was 1.0MPa,impregnating time was 30min and the vacuum time after impregnating was 20 min. |
| |
| Keywords: | composite silica sol strengthen techniques |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
