首页 | 本学科首页   官方微博 | 高级检索  
     

双螺杆磨浆机螺纹元件三维流场分析
引用本文:冯振华,冯连勋. 双螺杆磨浆机螺纹元件三维流场分析[J]. 中华纸业, 2006, 27(5): 47-49
作者姓名:冯振华  冯连勋
作者单位:北京化工大学机电工程学院,北京,100029
摘    要:建立了双螺杆磨浆机中螺纹元件流道的三维几何模型,利用FLUENT有限元软件对悬浮液纸浆在流道内的流动状态进行了模拟分析,得出了速度场和压力场.在此基础上,对剪切速率及剪切粘度进行了模拟计算.结果表明,纤维物料通过正向螺纹段时,受到较大的挤压和剪切,促使纤维分离并帚化分丝;纤维物料通过反向螺纹时,同样受到剪切,并能使物料匀整化.

关 键 词:双螺杆  流场分析
文章编号:1007-9211(2006)05-0047-03
修稿时间:2005-12-19

An analysis of the three-dimensional flow field of the screw elements in BIVIS Extruder
FENG Zhen-hua,FENG Lian-xun. An analysis of the three-dimensional flow field of the screw elements in BIVIS Extruder[J]. China Pulp & Paper Industry, 2006, 27(5): 47-49
Authors:FENG Zhen-hua  FENG Lian-xun
Abstract:A three-dimensional model on the flight elements in BIVIS Extruder was built and the flow simulation of the pulp was performed by a FEM package -- FLUENT and the velocity field and pressure field were generated. Based on the calculated pressure and velocity profile, the shear rate and shear viscosity were simulated. The results show that fibrous materials got more extrusion and cut in positive screw thus the fiber got separated and fibrillated and they also got cut in reverse screw and the materials got even and orderly.
Keywords:BIVIS  FLUENT
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号