首页 | 本学科首页   官方微博 | 高级检索  
     

响应面优化蒲公英橡胶草菊糖提取工艺及其MALDI-TOF MS分析
引用本文:陈江艳,王维滔,董益阳,张继川,胡孔新,马强.响应面优化蒲公英橡胶草菊糖提取工艺及其MALDI-TOF MS分析[J].食品工业科技,2022,43(1):205-212.
作者姓名:陈江艳  王维滔  董益阳  张继川  胡孔新  马强
作者单位:1.北京化工大学生命科学与技术学院, 北京 1000292.北京化工大学材料科学与工程学院, 北京1000293.中国检验检疫科学研究院卫检所, 北京1001764.中国检验检疫科学研究院工业品所, 北京100176
基金项目:北京化工大学-中日友好医院生物医学转化工程研究中心联合项目(RZ2020-02);“十三五”国家重点研发计划NQI专项项目(2016YFF0203703)。
摘    要:以蒲公英橡胶草根为原料,采用超声提取的方式,通过单因素实验和响应面试验探究了超声功率、提取时间、超声温度、液料比对蒲公英橡胶草菊糖提取率的影响,得到蒲公英橡胶草菊糖提取的最佳工艺为:超声功率230 W、超声时间34 min、超声温度61 ℃、液料比30:1(mL:g),菊糖提取率为20.14%±0.19%。采用氢氧化钙-磷酸法、三氯乙酸法、Sevage法进行脱蛋白纯化,得出氢氧化钙-磷酸法的效果最好,其蛋白清除率达90.78%,菊糖损失率为26.44%。将菊糖粗提液经蛋白纯化、脱色、旋蒸、醇沉及真空冷冻干燥后得到纯度为80.8%的菊糖,为白色固体粉末。经MALDI-TOF MS进行表征分析,确定其单体的分子量为162,端基的分子量和为179,能检测到的聚合度范围为2~30。此研究为蒲公英橡胶草的综合利用研究提供了理论依据。

关 键 词:蒲公英橡胶草    菊糖    提取    响应面    纯化    基质辅助激光解析电离飞行时间质谱
收稿时间:2021-04-26

Optimization of Extraction of Inulin from Taraxacum kok-saghyz Rodin by Response Surface Methodology and Its MALDI-TOF MS Analysis
CHEN Jiangyan,WANG Weitao,DONG Yiyang,ZHANG Jichuan,HU Kongxin,MA Qiang.Optimization of Extraction of Inulin from Taraxacum kok-saghyz Rodin by Response Surface Methodology and Its MALDI-TOF MS Analysis[J].Science and Technology of Food Industry,2022,43(1):205-212.
Authors:CHEN Jiangyan  WANG Weitao  DONG Yiyang  ZHANG Jichuan  HU Kongxin  MA Qiang
Affiliation:1.College of Life Science and Technology, Beijing University of Chemical Technology, Beijing 100029, China2.College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China3.Institute of Health Inspection and Quarantine, Chinese Academy of Inspection and Quarantine, Beijing 100176, China4.Institute of Industrial and Consumer Product Safety, Chinese Academy of Inspection and Quarantine, Beijing 100176, China
Abstract:Using Taraxacum kok-saghyz Rodin root as raw material, the effects of ultrasonic power, extraction time, ultrasonic temperature and liquid-solid ratio on the extraction rate of inulin from Taraxacum kok-saghyz Rodin root were studied based on single factor experiment and response surface experiment. The optimum extraction conditions of inulin from Taraxacum kok-saghyz Rodin root were as follows: Ultrasonic power 230 W, ultrasonic time 34 min, ultrasonic temperature 61 ℃, liquid-solid ratio 30:1 (mL:g), and the extraction rate of inulin was 20.14%±0.19%. The calcium hydroxide-phosphoric acid method, trichloroacetic acid method and Sevage method were used for protein purification, and the results showed that the calcium hydroxide-phosphoric acid method had the best effect, with a protein clearance rate of 90.78% and an inulin loss rate of 26.44%. Inulin with a purity of 80.8% was obtained after protein purification, decolorization, alcohol precipitation and vacuum freeze drying, was a white solid powder. The obtained inulin was characterized and analyzed by MALDI-TOF MS, which determined that the molecular weight of the monomer was 162, the molecular weight of the end group was 179, and the degree of polymerization can be detected in the range of 2 to 30. This study provides a theoretical basis for the comprehensive utilization of Taraxacum kok-saghyz Rodin.
Keywords:Taraxacum kok-saghyz Rodin  inulin  extraction  response surface  purification  matrix-assisted laser desorption/ionization time-of-flight mass spectrometry(MALDI-TOF MS)
本文献已被 维普 等数据库收录!
点击此处可从《食品工业科技》浏览原始摘要信息
点击此处可从《食品工业科技》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号