首页 | 本学科首页   官方微博 | 高级检索  
     

制浆过程筛选工段DCS控制
引用本文:王孟效,汤伟,施颂椒.制浆过程筛选工段DCS控制[J].中国造纸,2002,21(6):24-27.
作者姓名:王孟效  汤伟  施颂椒
作者单位:1. 陕西科技大学,陕西咸阳,712081
2. 上海交通大学,上海,200030
基金项目:国家“九·五”攻关项目(97-619-02-03和97-619-02-04)资助课题。
摘    要:针对进口浆料筛选设备价格昂贵的现状,在全国掌握该设备的运行特点和工艺要求之后,成功地研制出了与之相配套的DCS控制系统。系统以亲华XDPS-400为软件开发平台,同工控机,PLC及浓度,流量,压力液位等多个传感器和执行器一起构成DCS控制子系统,实现各筛选设备之间的联锁控制和自动排渣。系统多处采用了比值加串联控制策略和自整定PID/PI控制,并已在漯河银鸽红业公司投入运行。

关 键 词:造纸  制浆过程  浆料筛选  筛选设备  DCS控制系统
文章编号:0254-508X(2001)06-0024-04
修稿时间:2002年4月3日

DCS Control of Screening Stage in the Fiberline
Wang Mengxiao Tang Wei,Shi Songjiao.DCS Control of Screening Stage in the Fiberline[J].China Pulp & Paper,2002,21(6):24-27.
Authors:Wang Mengxiao Tang Wei  Shi Songjiao
Affiliation:Wang Mengxiao 1 Tang Wei 2 Shi Songjiao 2
Abstract:Considering the control system for stock screening equipment supplied by Ahlstrom Corporation is so expensive and many paper mills can't afford it,a distributed control system(DCS)suitable for this equipment is developed when the operation characteristics and process requirement of the equipment are grasped.The DCS is composed of industrial computer,PLC,sensors for consistency,flow,pres-sure and level,etc,as well as actuators on the development platform of XDPS-400of Xinhua Corporation,by which such functions as in-terlocking control among parts of Ahlstrom screening equipment and automatic reject discharge are implemented.Several advanced algo-rithms ,for instance,ratio plus series control and autotuning PID/PI control,are employed in this subsystem.And it has been put in oper-ation and resulted in significant profits.
Keywords:stock screening  Ahlstrom screening equipment  DCS  fiberline
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号