| 鱼罐头豆豉自动计量落料机凸轮的设计 |
| |
| 引用本文： | 邹振健,唐伟强,蔡叶,聂世涛,李艳平.鱼罐头豆豉自动计量落料机凸轮的设计[J].包装与食品机械,2010,28(4):34-36. |
| |
| 作者姓名： | 邹振健 唐伟强 蔡叶 聂世涛 李艳平 |
| |
| 作者单位： | 广州鹰金钱企业集团公司,广州,510655;华南理工大学机械与汽车工程学院,广州,510640;广州南联实业有限公司,广州,510540 |
| |
| 基金项目： | 广东省教育部产学研结合项目 |
| |
| 摘 要： | 针对豆豉鱼罐头的豆豉落料凸轮的设计要求,进行仿真设计,利用取点法取值一系列点,通过Matlab对这些点进行拟合,得出轨迹曲线方程,然后用UG绘制出轨迹曲线,从而得出一种近似轨迹槽,这种设计方法具有设计时间短和节约设计成本等优点。经过试机运行,这种方法设计出来的凸轮能够满足机构的工艺要求,性能良好。
|
| 关 键 词： | 凸轮 曲线拟合 UG实体建模 |
Design of the Can of Automatic Canned Fish Measuring Dropping Machine |
| |
| ZOU Zhen-jian,TANG Wei-qiang,CAI Ye,NIE Shi-tao,LI Yan-ping.Design of the Can of Automatic Canned Fish Measuring Dropping Machine[J].Packaging and Food Machinery,2010,28(4):34-36. |
| |
| Authors: | ZOU Zhen-jian TANG Wei-qiang CAI Ye NIE Shi-tao LI Yan-ping |
| |
| Affiliation: | ZOU Zhen-jian1,TANG Wei-qiang2,CAI Ye3,NIE Shi-tao2,LI Yan-ping3(1.Guangzhou Eagpe Coin Enterprises Group Corp,Guangzhou 510640,China,2.School of Mechechanical & Automotive Engineering.SCUT,3.Guangzhou Nanan Industry Co.Ltd,Guangzhou 510540,China) |
| |
| Abstract: | According to the actual needs and cam design requirements of the production,it used check-point method to take a series of points,through the Matlab fitting of these points obtained trajectory curve equation,and then draw the trajectory curve of UG to arrive at an approximate trajectory trough,through a trial machine operation,good performance. |
| |
| Keywords: | cam curve fitting UG solid modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
