| CPU风扇注塑模具冷却水道布置的优化设计 |
| |
| 引用本文： | 章易镰,鲁聪达,姜少飞,柴国钟,吴小明.CPU风扇注塑模具冷却水道布置的优化设计[J].轻工机械,2010,28(1):21-24. |
| |
| 作者姓名： | 章易镰 鲁聪达 姜少飞 柴国钟 吴小明 |
| |
| 作者单位： | 1. 浙江工业大学,机械制造教育部重点实验室,浙江,杭州,310014
2. 丽水职业技术学院,机电信息分院,浙江,丽水,323000 |
| |
| 基金项目： | 浙江省科技计划重大科技专项，浙江省科技计划项目，浙江丽水市科技计划项目 |
| |
| 摘 要： | 借助MPI软件，针对CPU风扇的成型质量，对冷却水道的布置进行了优化设计。通过对回路冷却介质温度、制品冻结时间、熔接痕和翘曲变形等方面进行对比，结果表明，八边形、双冷却液入口的方案熔接痕最少、翘曲变形量最小，是比较理想的冷却水道布置方案。图6表1参10
|
| 关 键 词： | 塑料工业 优化设计 MPI软件 风扇 冷却水道布置 |
Optimization Design of Cooling Channels Layout in Injection Mould for CPU Fan |
| |
| ZHANG Yi-lian,LU Cong-da,JIANG Shao-fei,CHAI Guo-zhong,WU Xiao-ming.Optimization Design of Cooling Channels Layout in Injection Mould for CPU Fan[J].Light Industry Machinery,2010,28(1):21-24. |
| |
| Authors: | ZHANG Yi-lian LU Cong-da JIANG Shao-fei CHAI Guo-zhong WU Xiao-ming |
| |
| Affiliation: | ZHANG+Yi-lian1,LU+Cong-da1,JIANG+Shao-fei1,CHAI+Guo-zhong1,WU+Xiao-ming2(1.The+MOE+Key+Laboratory+of+Mechanical+Manufacture+,+Automation,Zhejiang+University+of+Technology,Hangzhou+310014,China,2.Branch+School+of+Electro-Mechanical+Information+Engineering,Lishui+College+of+Vocational+Technology,Lishui+323000,China) |
| |
| Abstract: | Aiming at the moulding qualily of CPU fans, this paper made an optimized design on cooling channels layout with MPI software, and made a comparative analysis of different cooling channels design plans based on cooling channels＇ coolant temperature, plastic products＇ freezing time, weld mark and warpage deformation, etc. The results show that the plan of octagon ＆ double coolant inlet is a better design of cooling channels with the least weld line and the smallest warpage deformation. Ch ,6 fig. 1 tab. 10 ref. ] |
| |
| Keywords: | plastics industry optimization MPI software fan design of cooling channels |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
