| 桉木化学热磨机械浆的XPS和SEM分析 |
| |
| 引用本文： | 王香平,何北海,钱丽颖,邓永民.桉木化学热磨机械浆的XPS和SEM分析[J].造纸科学与技术,2009,28(1). |
| |
| 作者姓名： | 王香平 何北海 钱丽颖 邓永民 |
| |
| 作者单位： | 华南理工大学制浆造纸工程国家重点实验室,广东,广州,510640 |
| |
| 摘 要： | 本文研究了经碱性亚钠法处理的桉木化学热磨机械浆纸页强度指标,并利用X射线光电子能谱(XPS)和扫描电子显微镜(SEM)技术分析了纸浆纤维的表面特征.结果表明,随烧碱用量增加,桉木CTMP所抄纸页强度得到提高,纤维表面O/C比有所增大,且C1峰面积减小,说明浆料随处理用碱量增加,表面木素和抽提物含量降低,碳水化合物含量增加.SEM形貌图也证明了纤维表面的变化情况.
|
| 关 键 词： | 桉木化学热磨机械浆 碱性亚钠法处理 物理性能 表面特征 |
Analysis of Eucalyptus CTMP by XPS and SEM |
| |
| Wang Xiangping,He Beihai,Qian Liying,Deng Yongmin.Analysis of Eucalyptus CTMP by XPS and SEM[J].Paper Science & Technology,2009,28(1). |
| |
| Authors: | Wang Xiangping He Beihai Qian Liying Deng Yongmin |
| |
| Affiliation: | State Key Laboratory of Pulp and Paper Engineering;South China University of Technology;Guangzhou 510640;Guangdong;China |
| |
| Abstract: | This paper discussed the strength properties of eucalyptus CTMP with alkaline sodium sulfite treatment,and the fiber surface character of eucalyptus CTMP was also analyzed by using XPS and SEM.The results showed that the strength of paper sheet was improved with the increasing of the dosage of alkali,additionally,the O/C ratio of the fiber surface increased and the peak area of C1 decreased respectively.This indicated that there were less lignin and extractives and more carbohydrate on the fiber surface as ... |
| |
| Keywords: | eucalyptus CTMP alkaline sodium sulfite treatment strength properties fiber surface character |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
