| T10A钢真空加热及冷却时石墨析出与剥层分析 |
| |
| 引用本文： | 苏德达,郭建国.T10A钢真空加热及冷却时石墨析出与剥层分析[J].金属制品,2005,31(2):49-54. |
| |
| 作者姓名： | 苏德达 郭建国 |
| |
| 作者单位： | 天津大学 300073
(苏德达)，天津大学 300073(郭建国) |
| |
| 摘 要： | 用高温金相显微镜动态观察4种原始组织的T10A钢试样在真空加热及冷却时的石墨析出现象。观察发现在奥氏体晶粒晶界、亚晶界、孪晶界、残留渗碳体(碳化物)或夹杂物处优先析出石墨晶核,沿其六方点阵基面择优方向长大。剥层分析表明石墨呈薄层结构平铺在试样观察表面上,而其内部无石墨析出。T8A,T10A及T12A钢的二次石墨析出温度分别为800℃,850℃,900℃,3种钢的共析温度均为720～740℃。
|
| 关 键 词： | T10A钢 原始组织 真空加热及冷却 石墨析出 剥层分析 |
| 修稿时间： | 2004年8月3日 |
Graphite Precipitation and Layer Peeled off Analysis of T10A Steel Specimens when Heated and Cooled in Vacuum |
| |
| Su Deda,Guo Jianguo.Graphite Precipitation and Layer Peeled off Analysis of T10A Steel Specimens when Heated and Cooled in Vacuum[J].Steel Wire Products,2005,31(2):49-54. |
| |
| Authors: | Su Deda Guo Jianguo |
| |
| Affiliation: | 天津大学,300073 |
| |
| Abstract: | By means of high temperature microscope,graphite precipitation from T10A steel specimens with 4 kinds of original structures has been dynamicly observed when heated and cooled in vacuum.The results show that the precipitation give priority to form the graphite nucleus at the austenific grain boundary,sub-boundary,twin boundary,undisolved cementite or inclusions and it’s selevtive growth can be easy along with the fundamental faces of hexagonal lattice.It is confirmed by the layer peeled off analysis that thin layer of graphite lays on the specimen surface observed at level condition,but inside graphite precipitation of specimens doesn’t occur.The graphite precipitational temperatures of three high carbon steels(T8A,T10A,T12A)are 800 ℃,850 ℃ and 900 ℃ approximately and eutectoid temperatures are 720 ℃~740 ℃. |
| |
| Keywords: | T10A steel original structure heating and cooling in vacuum graphite precipition layer peeled off analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
