制钉用不锈钢丝的生产 |
| |
引用本文: | 党淑娥.制钉用不锈钢丝的生产[J].金属制品,1998,24(3):42-44. |
| |
作者姓名: | 党淑娥 |
| |
作者单位: | 太原线材厂 |
| |
摘 要: | 用SUS304生产出175~40mm不锈钢丝,再制成麻花钉。钢丝生产中用高锰酸钾碱液低温浸泡取代高温碱煮,可显著提高表面质量;固熔处理加热温度控制在1020~1040℃,保温时间20~30min,成品拉拔压缩率控制在17%~20%,其强度为685~930MPa,速度65~75m/min,以消除钢丝铁磁性反应,完全满足制钉钢丝质量要求。
|
关 键 词: | 不锈钢丝 麻花钉 生产工艺 |
Production of Stainless Steel Wire for Nail Making |
| |
Affiliation: | Taiyuan Wire Rod Factory 030024 |
| |
Abstract: | To produce 175~40mm stainless steel wire with material SUS304,then use it to make fluted twist nailSubstituting low temperature immersing with KMnO4 lye for high temperature alkaline boiling in steel wire production can notably improve the surface qualityHeating temperature of solution treatment is controlled at 1 020~1 040℃,thermal insulating time is 20~30min,condensation of end products drawing is controlled at 17%~20%,its strength is 685~930MPa,drawing speed is 65~75m/min,so as to clear up the ferromagnetic reaction of steel wireIt can completely meet the quality demands of nail making |
| |
Keywords: | stainless steel wire fluted twist nail production technology |
本文献已被 CNKI 维普 等数据库收录! |