|
|||||
|
|
| HR-I电子提花机控制器的设计 | |
| 引用本文： | 吴朝阳,苏俊,陈淑侠,芮延年.HR-I电子提花机控制器的设计[J].纺织学报,2010,31(3):115-118. |
| 作者姓名： | 吴朝阳 苏俊 陈淑侠 芮延年 |
| 作者单位： | 1. 南通大学机械学院,江苏,南通,226019 2. 南通职业大学机械学院,江苏,南通,226007 3. 苏州大学,机电学院,江苏,苏州,215021 |
| 基金项目： | 南通科技局资助项目(2008S8936) |
| 摘 要： | 针对如何快速地改变花形，废除纹板，减少资金和材料浪费等问题，在研究和分析国内外电子提花技术的基础上，提出一种低成本的电子提花控制技术方案，以代替机械提花机。以单片机ATmega128为核心，利用CAN总线传输提花数据，实现数据远距离的传输，利用ATmega16接收CAN总线上的数据，在中断信号作用下通过同步串行口把数据分发到各个组件上，信号经过功率放大，驱动电磁阀，用提针控制经纱沉浮。该系统经现场测试，可实现无差错数据传输，可靠性好，抗干扰性强，能方便地改变花形，满足织造要求，从而提高生产效率。 |
| 关 键 词： | ATmega128 提花机 CAN总线 控制器 数据传输 SJA1000 |
| 收稿时间： | 2009-06-24; |
Design of HR-I electronic jacquard machine controller |
|
| WU Zhaoyang,SU Jun,CHEN Shuxia,RUI Yannian.Design of HR-I electronic jacquard machine controller[J].Journal of Textile Research,2010,31(3):115-118. | |
| Authors: | WU Zhaoyang SU Jun CHEN Shuxia RUI Yannian |
| Affiliation: | 1.School of Mechanical;Nantong University;Nantong;Jiangsu 226019;China;2.School of Mechanical;Nantong Vocational College;Jiangsu 226007;3.College of Mechanical and Electrical Engineering;Soochow University;Suzhou;Jiangsu 215021;China |
| Abstract: | For rapid change of pattern and abandon of jacquard card,reduction of the waste of funds and materials,this paper proposed a low cost electronic jacquard control technology aiming to in replace of the mechanical jacquard based on analysis of domestic and foreign electronic jacquard technology.The MCU ATmega128 is used as the core,jacquard data transmission is affected by CAN-bus,thus realizing long-distance transmission of the data.The MCU ATmega16 receives the data from CAN-bus,and distributes data to the ... |
| Keywords: | ATmega128 jacquard machine CAN-bus controller data transmission SJA1000 |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
| 点击此处可从《纺织学报》浏览原始摘要信息 | |
| 点击此处可从《纺织学报》下载全文 | |