| 非对称钣金件的成形模具 |
| |
| 引用本文： | 刘睿,胡文奇.非对称钣金件的成形模具[J].机械管理开发,2005(2):10-10,12. |
| |
| 作者姓名： | 刘睿 胡文奇 |
| |
| 作者单位： | 经纬纺织机械股份有限公司榆次分公司,山西,晋中,030601 |
| |
| 摘 要： | 分析非对称钣金零件的形状成形，摸索影响成形的多种因素，不断改进模具结构，最终找到合理的模具结构，提高了零件成形的一致性。
|
| 关 键 词： | 压制成形 凸、凹模 非对称 |
| 文章编号： | 1003-773X(2005)02-0010-02 |
Forming Die for Asymmetric Sheet |
| |
| Liu Rui,Hu Wenqi.Forming Die for Asymmetric Sheet[J].Mechanical Management and Development,2005(2):10-10,12. |
| |
| Authors: | Liu Rui Hu Wenqi |
| |
| Affiliation: | Liu Rui Hu Wenqi |
| |
| Abstract: | In the article,the author analyzed the configuration and formation of asymmetric bending components thoroughly. During the uninterrupted modification of die structure, the author searched for many factors affected formation and found out the reasonable structure of die.The consistency of formed components was improved finally. |
| |
| Keywords: | Press Convex and concave dies Asymmetric |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
