| 基于UG NX的型腔零件3D建模与NC加工 |
| |
| 引用本文： | 王晓枫,赵春亮,王亮.基于UG NX的型腔零件3D建模与NC加工[J].机械工程与自动化,2005(6):25-27. |
| |
| 作者姓名： | 王晓枫 赵春亮 王亮 |
| |
| 作者单位： | 合肥工业大学,机械与汽车工程学院,安徽,合肥,230009 |
| |
| 摘 要： | 主要论述了型腔零件的三维设计与数控仿真加工。利用UGNX的Modeling模块实现了零件的三维设计，利用Manufacturing模块实现了零件的数控仿真加工并生成了NC仿真程序，很好地利用了UGNX软件CAD／CAM功能集成的特点，在对零件实际加工前进行加工仿真：提前发现干涉和过切问题并及时进行调整，提高了效率，降低了次品率。
|
| 关 键 词： | 3D建模 NC加工 型腔零件 UG NX |
| 文章编号： | 1672-6413(2005)06-0025-03 |
| 修稿时间： | 2005年6月18日 |
3D Modeling and NC Machining of Cavity Part on UG NX |
| |
| WANG Xiao-feng,ZHAO Chun-liang,WANG Liang.3D Modeling and NC Machining of Cavity Part on UG NX[J].Mechanical Engineering & Automation,2005(6):25-27. |
| |
| Authors: | WANG Xiao-feng ZHAO Chun-liang WANG Liang |
| |
| Abstract: | The paper introduces 3D modeling and NC machining of cavity part,the 3D modeling of the cavity part is completed in the Modeling function of UG NX,the NC machining and simulation of the cavity part is performed in the Manufacturing function of UG NX.By use of the speciality of CAD/CAM intergrated of UG NX,the course of machining can be simulated before the part is machining actually,some problem can be found and rectified in time,the efficiency is enhanced and the rate of waster is reduced. |
| |
| Keywords: | 3D modeling NC machining cavity part UG NX |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
