| Pro/Engineer组件建模中的参数化方法 |
| |
| 引用本文： | 王三武,刘坤,马书恒.Pro/Engineer组件建模中的参数化方法[J].机械工程与自动化,2006(1):94-95,98. |
| |
| 作者姓名： | 王三武 刘坤 马书恒 |
| |
| 作者单位： | 武汉理工大学,湖北,武汉,430070 |
| |
| 摘 要： | 介绍了Pro／Engineer环境下，通过组件与元件间的共享参数关联，实现组件自上而下的参数化建模方法。采用这种方法，有利于产品修改和系列化设计，提高了设计效率。
|
| 关 键 词： | 组件 参数化建模 |
| 文章编号： | 1672-6413（2006）01-0094-02 |
| 收稿时间： | 2005-08-01 |
| 修稿时间： | 2005-08-012005-09-21 |
Parametric Methods of Assembly Modeling Based on Pro/Engineer |
| |
| WANG San-wu,LIU Kun,MA Shu-heng.Parametric Methods of Assembly Modeling Based on Pro/Engineer[J].Mechanical Engineering & Automation,2006(1):94-95,98. |
| |
| Authors: | WANG San-wu LIU Kun MA Shu-heng |
| |
| Affiliation: | Wuhan University of Technology,Wuhan 430070,China |
| |
| Abstract: | The article introduces a parametric method of assembly modeling under Pro/Engineer, by connecting the sharing parameters between the assembly and the components. The method is in favor of tbe modification and serialized design of a product, so the design efficiency has been improved. |
| |
| Keywords: | Pro/E |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
