首页 | 本学科首页   官方微博 | 高级检索  
     

基于传感器的直接驱动机器人动力学建模及控制
引用本文:贺红林,赵淳生.基于传感器的直接驱动机器人动力学建模及控制[J].机械科学与技术(西安),2005,24(4):379-382.
作者姓名:贺红林  赵淳生
作者单位:南京航空航天大学超声电机研究中心 南京210016 (贺红林),南京航空航天大学超声电机研究中心 南京210016(赵淳生)
基金项目:国家自然科学基金重点项目(50235010)资助
摘    要:在关节上引入力矩传感器进行力矩反馈后,推导出了直接驱动机器人的简单的、线性化的、非时变的动力学模型。在此基础上,利用解耦控制法实现了直接驱动机器人的控制。考虑到力矩传感器的引入,可能会导致驱动系统的刚度下降,文中还对力矩传感器的频率特性及关节结构的设计进行了较深入地研究,研究结果表明,只要适当配置转子、关节轴、连杆的转动惯量,就能保证在安装传感器后,驱动系统的刚度基本不下降。

关 键 词:力矩传感器  直接驱动机器人  动力学模型  解耦控制
文章编号:1003-8728(2005)04-0379-04

Dynamic Modeling and Control of a Direct Drive Robot with Torque Sensor Feedback
HE Hong-lin,ZHAO Chun-sheng.Dynamic Modeling and Control of a Direct Drive Robot with Torque Sensor Feedback[J].Mechanical Science and Technology,2005,24(4):379-382.
Authors:HE Hong-lin  ZHAO Chun-sheng
Abstract:A torque sensor is set on the joint of a direct drive robot to measure the torque exerting on the joint, which greatly helps to build the time-independent, simple, and linear dynamic model proposed in this paper. A decoupling control approach is used to control the robot based on the model. To make sure that the stiffness of the drive system of the joint will not be decreased with the assembling of such a sensor, the property of the torque sensor and the design of the joint are studied deeply. The result shows that as long as the inertia of the rotor, the link and the axe are configured properly, the stiffness will not change much.
Keywords:Torque sensor  Direct drive robot  Dynamic model  Decoupling control
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号