| 车铣加工中心协同建模与仿真分析 |
| |
| 引用本文： | 朱立达,于天彪,杨建宇,李虎,王宛山.车铣加工中心协同建模与仿真分析[J].机械科学与技术(西安),2010(4). |
| |
| 作者姓名： | 朱立达 于天彪 杨建宇 李虎 王宛山 |
| |
| 作者单位： | 东北大学机械工程与自动化学院; |
| |
| 基金项目： | 国家自然科学基金项目(50975043)资助 |
| |
| 摘 要： | 高档数控机床需要良好的动态性和加工精度,以满足现代机械加工工艺的要求。为了准确的预测车铣加工中心的性能,笔者基于多柔体动力学利用有限元分析和多体系统集成的方法分析机床的动态特性。在多柔体系统理论基础上,通过ADAMS与ANSYS对车铣加工中心进行协同建模与仿真,分别获得其为多刚体和多柔体系统时电机驱动力对比曲线和刀尖轨迹对比曲线。从对比结果可以看出多柔体分析更接近于实际情况。
|
| 关 键 词： | 车铣加工中心 多柔体系统 协同建模 仿真 |
Collaborative Modeling and Simulation Analysis of a Turn-milling Center |
| |
| Zhu Lida,Yu Tianbiao,Yang Jianyu,Li Hu,Wang Wanshan.Collaborative Modeling and Simulation Analysis of a Turn-milling Center[J].Mechanical Science and Technology,2010(4). |
| |
| Authors: | Zhu Lida Yu Tianbiao Yang Jianyu Li Hu Wang Wanshan |
| |
| Affiliation: | School of Mechanical Engineering and Automation/a>;Northeastern University/a>;Shenyang 110004 |
| |
| Abstract: | Modern NC machine tools need high dynamical performance and machining accuracy to keep up with the requirements of modern machining processes.In order to forecast the performance of a turn-milling center,the dynamics of machine tools are analyzed by the integrated method of finite element analysis and multibody system based on flexible multibody dynamics.Collaborative modeling and simulation of the turn-milling center is realized by ADAMS and ANSYS softwares,the comparitive curves of driving forces and the ... |
| |
| Keywords: | turn-milling center flexible multibody system collaborative modeling simulation |
| 本文献已被 CNKI 等数据库收录！ |
