| 回转曲面螺旋槽数控加工技术研究 |
| |
| 引用本文： | 王增强,蔺小军,史耀耀,单晨伟.回转曲面螺旋槽数控加工技术研究[J].机械科学与技术(西安),2007,26(4):428-430. |
| |
| 作者姓名： | 王增强 蔺小军 史耀耀 单晨伟 |
| |
| 作者单位： | 西北工业大学现代设计与集成制造技术教育部重点实验室,西安710072 |
| |
| 摘 要： | 为了解决回转曲面螺旋槽的加工难题,本文提出了回转曲面螺旋槽数控编程的数学模型建立方法,对其数控加工编程进行了研究,并提出了数控加工走刀步长确定的计算方法。实际加工结果表明,该方法提高了回转曲面螺旋槽加工精度和效率。
|
| 关 键 词： | 回转曲面螺旋槽 数控加工 走刀步长 |
| 文章编号： | 1003-8728（2007）04-0428-03 |
| 修稿时间： | 2005-12-02 |
Research on NC Machining of Screw Flutes with Surface of Revolution |
| |
| Wang Zengqiang,Lin Xiaojun,Shi Yaoyao,Shan Chenwei.Research on NC Machining of Screw Flutes with Surface of Revolution[J].Mechanical Science and Technology,2007,26(4):428-430. |
| |
| Authors: | Wang Zengqiang Lin Xiaojun Shi Yaoyao Shan Chenwei |
| |
| Abstract: | The paper presented an approach to the mathematical modeling and programming for the NC machining of screw flutes with surfaces of revolution. It also put forward a calculation method for determining the cutting steplength during the NC machining. The machining practice shows that the approach enhances the efficiency and precision for the machining of screw flutes with surfaces of revolution. |
| |
| Keywords: | screw flute with surface of revolution NC machining cutting step-length |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
