| 面向模块化、智能化、参数化的产品变型设计技术研究 |
| |
| 引用本文： | 王相兵,王宗彦,吴淑芳,马士良.面向模块化、智能化、参数化的产品变型设计技术研究[J].机械科学与技术(西安),2010(2). |
| |
| 作者姓名： | 王相兵 王宗彦 吴淑芳 马士良 |
| |
| 作者单位： | 中北大学机械工程与自动化学院; |
| |
| 基金项目： | 国家863/现代集成制造系统技术主题项目(2005AA415240)资助 |
| |
| 摘 要： | 变型设计是企业目前广泛采用的机械设计方法。在对参数化、模块化与系列化产品变型设计之间关系进行分析研究的基础上,结合广义模块化技术,采用基于实例的设计CBD(case-based design),利用参数化设计的"自上而下"设计(Top-Down Design)模式,形成了参数化、模块化、智能化相结合的系列化产品变型设计方法。并利用Solidworks二次开发技术及VB开发程序,实现了门式起重机系列产品的变型设计。
|
| 关 键 词： | 变型设计 参数化 模块化 智能化 门式起重机 |
On Product Variant Design Based on Parameterization, Modularization and Artificial Intelligence |
| |
| Wang Xiangbing,Wang Zongyan,Wu Shufang,Ma Shiliang.On Product Variant Design Based on Parameterization, Modularization and Artificial Intelligence[J].Mechanical Science and Technology,2010(2). |
| |
| Authors: | Wang Xiangbing Wang Zongyan Wu Shufang Ma Shiliang |
| |
| Affiliation: | College of Mechnical Engineering and Automation/a>;North University of China/a>;Taiyuan 030051 |
| |
| Abstract: | Variant Design is a mechanical design method currently used by enterprises widely. A variant design method for series products is presented for integrating the parametric,modular and intelligent technology. This method was based on the analysis of the relationship of parameterization,modularization and series products. In this method,the case-based design and the top-down design mode of parametic design are adopted. We have realized the variant design of a gantry crane series products by using Solidworks an... |
| |
| Keywords: | variant design parametrzation modularization artificial intelligence gantry crane |
| 本文献已被 CNKI 等数据库收录！ |
