首页 | 本学科首页   官方微博 | 高级检索  
     

基于几何非线性大型带式输送机动力学仿真
引用本文:李光布,李儒琼,韦家增.基于几何非线性大型带式输送机动力学仿真[J].中国机械工程,2007,18(1):23-25,113.
作者姓名:李光布  李儒琼  韦家增
作者单位:上海师范大学,上海,201418
基金项目:上海市教委科学研究项目资助项目
摘    要:用离散单元模型建立了基于胶带悬垂度的带式输送机非线性运动微分方程,推导了胶带等效刚度表达式,分析其非线性特性及对运动微分方程的影响。提出并建立了三台电动机和液力偶合器组成的驱动系统的数学模型,并据此设计动态仿真软件BDS。对一条带式输送机的动态性能进行了数值计算,其结果与国外软件计算结果进行比较,发现两者比较接近;对离散单元模型和连续介质模型等三个模型之间的张力波波动速度进行比较,结果十分吻合。最后分析了数值解和步长之间的关系。

关 键 词:几何非线性模型  等效刚度  驱动系统数模框图  BDS软件  动态特性仿真
文章编号:1004-132X(2007)01-0023-03
修稿时间:2006-05-30

Simulation of Belt Conveyor Dynamics Based on Geometry Nonlinearity
Li Guangbu,Li Ruqiong,Wei Jiazeng.Simulation of Belt Conveyor Dynamics Based on Geometry Nonlinearity[J].China Mechanical Engineering,2007,18(1):23-25,113.
Authors:Li Guangbu  Li Ruqiong  Wei Jiazeng
Affiliation:Shanghai Normal University,Shanghai, 201418
Abstract:This paper described the non-linear motion equation of belt conveyor based on belt sag, with a lumped element model. It deduced the belt equivalent stiffness and studied its non-linear property. The paper set up the model of a drive system with three motors and hydraulic couplings and designed the dynamics simulation software BDS. It carried out the simulation on a conveyor dynamics performance. Comparison of simulation results obtained by BDS and other software shows that both are similar relatively. Also the belt tension velocities obtained with two lumped element models and a continuous body model agree very well. It further studied the relationship between digital results and step length.
Keywords:geometry non-linear model  equivalent stiffness  drive system frame chart  BDS software  dynamic behavior simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号