| 基于接触单元的磨床螺栓连接面有限元建模与模型修正 |
| |
| 引用本文： | 陈新,孙庆鸿,毛海军,陈南.基于接触单元的磨床螺栓连接面有限元建模与模型修正[J].中国机械工程,2001,12(5):524-526. |
| |
| 作者姓名： | 陈新 孙庆鸿 毛海军 陈南 |
| |
| 作者单位： | 陈新
孙庆鸿
毛海军
陈南 |
| |
| 基金项目： | 江苏省“九五”重大工业攻关项目(BG98006—2) |
| |
| 摘 要： | 以接触单元和弹簧－－阻尼单元建立了磨床螺栓连接件的结合面动力学有限元模型。并以前3阶试验模态及有限元模型理论计算的固有频率均方差最小为目标函数，对包含接触单元和弹簧－－阻尼单元的结合面特征参数进行优化，在此基础上修正并取得更为符合实际的结合面动力学模型，这对机床结构的动态优化设计具有重要意义。
|
| 关 键 词： | 结合面 有限元模型 模型修正 内圆磨床 接触单元 螺栓连接 |
| 文章编号： | 1004-132X(2001)05-0524-03 |
Modeling and Correcting FEM with Contact Element for the Combined Surfaces of Grinder Bolts |
| |
| CHEN Xin,SUN Qinghong,MAO Haijun,CHEN Nan.Modeling and Correcting FEM with Contact Element for the Combined Surfaces of Grinder Bolts[J].China Mechanical Engineering,2001,12(5):524-526. |
| |
| Authors: | CHEN Xin SUN Qinghong MAO Haijun CHEN Nan |
| |
| Abstract: | The Finite Element Model(FEM) of the grinder bolt combined surfaces using the contact element and spring-damp element is built with the consideration of combined surfaces' characteristics. By minimuming the mean square deviation between the first three tested eigen-frequencies and ones calculated by FEM, the parameters of the combined surfaces including the contact element and the spring-damp element have been determined.A better dynamic model of the contact surface is obtained by optimizing the parameters. The model has important values for structural optimizing design of the grinder. |
| |
| Keywords: | combined surface optimization finite element model model correction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
