| 机电系统虚拟样机协同建模与仿真技术研究 |
| |
| 引用本文： | 宁芊,殷国富,徐雷.机电系统虚拟样机协同建模与仿真技术研究[J].中国机械工程,2006,17(13):1404-1407. |
| |
| 作者姓名： | 宁芊 殷国富 徐雷 |
| |
| 作者单位： | 四川大学,成都,610064 |
| |
| 基金项目： | 国家自然科学基金资助项目（50275100） |
| |
| 摘 要： | 针对机电系统虚拟样机设计的需要，在单学科仿真建模的基础上，进行基于仿真软件接口的多学科协同建模与仿真分析。以工业机器人虚拟样机的关节运动控制为例，利用ADAMS／Controls模块，将动力学模型通过接口变量与控制模型进行连接，建立连杆一关节执行机构多体动力学与运动控制协同的虚拟样机多学科集成模型，并进行协同仿真运行，表明基于仿真软件接口的协同建模与仿真方法能够有效支持机电系统虚拟样机的开发技术研究。
|
| 关 键 词： | 机电系统 工业机器人 虚拟样机 多学科建模 协同仿真 |
| 文章编号： | 1004-132X（2006）13-1404-04 |
| 收稿时间： | 2005-12-30 |
| 修稿时间： | 2005-12-30 |
Research on Virtual Prototype Collaborative Modeling & Simulation Technology for Mechatronic System |
| |
| Ning Qian,Yin Guofu,Xu Lei.Research on Virtual Prototype Collaborative Modeling & Simulation Technology for Mechatronic System[J].China Mechanical Engineering,2006,17(13):1404-1407. |
| |
| Authors: | Ning Qian Yin Guofu Xu Lei |
| |
| Affiliation: | Sichuan University, Chengdu, 610064 |
| |
| Abstract: | To focus on the demand of mechatronic system virtual prototype design,on the basis of mono-disciplined modeling,the multi-disciplined modeling & collaborative simulation technology based on software interfaces for mechatronic system was probed into.In the motion control practice of industrial robot virtual prototype joints,connecting the dynamic model with the control model through interface variables by ADAMS/Controls module,the multi-discipline integrated model of rod-joint executor machine multi-body dynamics and motion control collaborating was established.And the example indicates that this collaborative modeling and simulation method by using simulation software interfaces is one of the effectively implementary technologies for mechatronic system virtual prototype engineering. |
| |
| Keywords: | mechatronic system industrial robot virtual prototype multidisciplined modeling collaborative simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
