|
|||||
|
|
| 激光工程化净成形技术同轴送粉的研究 | |
| 引用本文： | 尚晓峰,刘伟军,王天然,王志坚.激光工程化净成形技术同轴送粉的研究[J].中国机械工程,2004,15(22):1994-1997. |
| 作者姓名： | 尚晓峰 刘伟军 王天然 王志坚 |
| 作者单位： | 1. 中国科学院沈阳自动化研究所先进制造实验室,沈阳,110016;沈阳理工大学机械工程学院,沈阳,110168 2. 中国科学院沈阳自动化研究所先进制造实验室,沈阳,110016 3. 沈阳航空工业学院机械与汽车学院,沈阳,110016 |
| 摘 要： | 介绍了激光工程化净成形系统同轴送粉器组成和工作原理；通过试验分析可知，粉末送给量与步进电机转速成正比，加工层厚与粉末送给量成正比；激光焦点与喷粉焦点不重合是造成成形件侧表面粗糙、堆积高度波动、截面厚度不均匀和尺寸误差的直接原因，调整激光焦点位置使激光焦点与喷粉焦点重合可有效解决上述问题。 |
| 关 键 词： | 快速成形 激光工程化净成形 同轴送粉 金属功能零件 |
| 文章编号： | 1004-132X(2004)22-1994-04 |
Research on Coaxial Powder-feed of Laser Engineered Net Shaping |
|
| Shang Xiaofeng , Liu Weijun Wang Tianran Wang Zhijian . Shenyang Institute of Automation,Chinese Academy of Sciences,Shenyang, . Shenyang Institute of Technology,Shengyang, . Shenyang Institute of Aeronautical Engineering,Shengyang.Research on Coaxial Powder-feed of Laser Engineered Net Shaping[J].China Mechanical Engineering,2004,15(22):1994-1997. | |
| Authors: | Shang Xiaofeng Liu Weijun Wang Tianran Wang Zhijian Shenyang Institute of Automation Chinese Academy of Sciences Shenyang Shenyang Institute of Technology Shengyang Shenyang Institute of Aeronautical Engineering Shengyang |
| Affiliation: | Shang Xiaofeng 1,2 Liu Weijun 1 Wang Tianran 1 Wang Zhijian 3 1. Shenyang Institute of Automation,Chinese Academy of Sciences,Shenyang,110016 2. Shenyang Institute of Technology,Shengyang,110168 3. Shenyang Institute of Aeronautical Engineering,Shengyang,110034 |
| Abstract: | The composition and principle of the Laser Engineered Net Shaping (LENS) system coaxial powder-feed equipment was introduced. Through the experiments and analyses it is known that the powder flux is direct ratio with the rotational speeds of stepper motor, the layer thickness is direct ratio with the powder flux and the formed part side surface roughness, deposit thickness fluctuation, section thickness non-homogeneous and dimension error are directly resulted by the noncoincidence of the laser focus and the powder focus. These problems are efficiently resulted by adjusting the laser focus position to it coincides with the powder focus. |
| Keywords: | rapid prototyping laser engineered net shaping coaxial powder-feed metal function part |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |