| 钛及钛合金的磨削工艺研究 |
| |
| 引用本文： | 殷志波,李福援,李士弘.钛及钛合金的磨削工艺研究[J].新技术新工艺,2011(3):63-65. |
| |
| 作者姓名： | 殷志波 李福援 李士弘 |
| |
| 作者单位： | 1. 西安工业大学,机电工程学院,陕西,西安,710032
2. 中航工业庆安集团有限公司,陕西,西安,710077 |
| |
| 摘 要： | 针对钛及钛合金磨削加工难的特点,采用砂纸磨削及柔性模具加磨料的方法对钛及钛合金表面进行磨削加工,对表面质量、条纹深度、条纹宽度以及表面粗糙度随砂纸粒度的变化情况进行分析。结果表明,采用砂纸磨削的方法可以对钛及钛合金进行磨削加工,磨削表面质量良好,没有烧伤、裂痕等缺陷,表面粗糙度最低可降低到0.02μm,可以达到镜面的效果。
|
| 关 键 词： | 钛 钛合金 磨削加工 表面粗糙度 |
Study of Titanium and Titanium Alloy Grinding Process |
| |
| YIN Zhibo,LI Fuyuan,LI Shihong.Study of Titanium and Titanium Alloy Grinding Process[J].New Technology & New Process,2011(3):63-65. |
| |
| Authors: | YIN Zhibo LI Fuyuan LI Shihong |
| |
| Affiliation: | YIN Zhibo1,LI Fuyuan1,LI Shihong2(1.School of Mechatronic Engineering,Xi'an Technological University,Xi'an 710032 China,2.China Qing'an Aviation Industry Group Co.,Ltd,Xi'an 710077,China) |
| |
| Abstract: | The characteristics of regarding that Titanium and Titanium alloy are difficult to be grinded,the author applied the method of grinding Titanium and Titanium alloy by sand paper to analyze the relationship between the sand grain size and surface quality,stripe depth,stripe width and surface roughness.the results show that by this method,this surface quality is good,no burns,cracks and other defects,the surface roughness can be reduced to about 0.02 μm and can achieve the mirror effects. |
| |
| Keywords: | Titanium Titanium alloy Regarding Roughness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《新技术新工艺》浏览原始摘要信息 |
|
点击此处可从《新技术新工艺》下载全文 |
|
